WÜTOP sealing tape EURASOL plus 60 mm 25 meters 4 rolls

Self-adhesive sealing tape EURASOL plus

• Color: White
• Width: 60 mm
• Length: 25 metres
• Contents: 4 rolls
• Backing material: PE foil with net
• Adhesive base: Acrylic dispersion
• Min./max. processing temperature: 0 to 50 °C
• Min./max. temperature resistance: -40 to 100 °C
• Resistance to ultraviolet light: 3 months
• Solvent free: Yes
• Sustainability: Low-emission/low-pollution

Field of application
Suitable for indoor and outdoor use (UV resistance: 3 months)

Permanent attachment of false ceilings, vapor barriers and vapor retarders.
Effortless attachment of such foils in corners and edge areas, e.g. on wood (< 20% moisture content in the wood), metal, hard plastic
EURASOL Plus is ideal for bonding PP-based Wütop vapor retarders, Wütop vapor barriers and Wütop roof protection foils and has been tested on these foils. We therefore recommend the use of these Wütop foils to achieve optimal results with the Würth air sealing system.

Instructions
Fold the EURASOL Plus in half and pull one half of the masking paper back a few centimeters. Then put the tape on one side of the corner. Pull back the masking paper and press the adhesive tape halfway down the entire length to secure it. The other half of the masking paper is then pulled off and the tape is pressed on. Always ensure sufficient contact pressure. After sticking, cut the self-adhesive tape with a knife.

Special tape for corner sealing and edge sealing
Tested aging resistance

Maximum reliability in blower door tests
Protects against moisture and mold formation in the insulation
Excellent initial and final adhesion

Fast, simple and safe application

Flexible carrier material

Adapts easily to penetrations

Divided protective paper

Very fast and practical sealing of edges and corners

Free of solvents

Note
The surfaces must be dry and free of grease, shavings and dust. Ensure that standing water cannot collect in taped areas.

Certified for thermal aging and moisture resistance by the University of Kassel
Documentation for airtight sealing from the Fraunhofer Institute for Building Physics in Stuttgart based on DIN 18055/DIN EN 42 and DIN V 4108-7/prEN 12114
GIG
EMICODE EC1plus: Very low emission: The EMICODE system makes it possible to assess the product's impact on the indoor climate in a building. Products with very low emissions are marked with EC1plus.

These technical information and work instructions are based on our experience with the product. It is recommended that you do a test yourself before use. For further information, refer to the technical data sheet. Due to the large number of storage and application options, a specific result is not guaranteed. If our free customer service provides technical information or provides advice, this service is provided to the exclusion of any liability, unless the advice or information falls within our stated, contractually agreed scope of services, or the customer service employee has acted intentionally. We guarantee a uniform quality of our products. We reserve the right to make technical changes and improvements.

EURASOL P is included in Würth Denmark's 30-year system warranty together with Wütop vapor barrier/brake (DB20/DB2), foil adhesive and pipe and cable entries

The product is included in the database for construction products that can be used in Swan-labelled construction.

EMICODE certified. Very low evaporation to the indoor climate.