Leaf catch
Filters
Bladfang & trådkugler – undgå stoppede nedløb og kloak
Stoppede nedløbsrør og kloak kan hurtigt føre til overløb, fugtskader og dyre reparationer. Med de rette bladfang og trådkugler stopper du problemet, før det opstår.
Hos Blikshop finder du enkle og effektive løsninger, der holder blade, snavs og skidt ude af nedløb og afløb – så vandet altid kan løbe frit væk fra din bolig.
👉 Resultatet? Færre problemer, mindre vedligehold og en langt mere driftssikker afvanding.
Derfor vælger kunder vores bladfang & trådkugler
- Forhindrer tilstopning af nedløbsrør og kloak
- Sikrer fri vandgennemstrømning – selv ved kraftig regn
- Reducerer risikoen for overløb og vandskader
- Minimerer behovet for rensning
- Nem og hurtig montering
Trådkugler – den hurtigste løsning til nedløb
Trådkugler placeres direkte i nedløbsrøret og fungerer som et effektivt filter.
De lader vandet passere frit, mens blade og snavs bliver fanget, før det kan skabe blokeringer længere nede i systemet.
✔ Hurtig løsning
✔ Ingen værktøj
✔ Virker med det samme
Bladfang – stop problemet ved kilden
Bladfang monteres ved toppen af nedløbet og forhindrer blade i at blive skyllet ned i røret og videre i kloakken.
Det betyder:
- Mindre belastning på hele afvandingssystemet
- Lavere risiko for tilstopninger
- En mere stabil løsning året rundt
Minimal vedligeholdelse – maksimal effekt
Bladfang kræver kun et hurtigt tjek én gang om året. I områder med meget løvfald skal der holdes jævnligt opsyn, så vandet stadig har frit løb.
Blade og snavs samler sig ovenpå, hvor det ofte fjernes af vinden – ellers kan det nemt fjernes manuelt, især i efterårssæsonen.
Skulle der slippe noget igennem, kan bladfanget hurtigt afmonteres, renses og monteres igen på få minutter.
👉 Sørg altid for, at det sidder korrekt, så det dækker optimalt og yder maksimal beskyttelse.
Undgå dyre problemer – med en simpel løsning
Når nedløb og kloak stopper, kan det føre til:
- Overløb ved sokkel og facade
- Fugtskader
- Frostsprængninger
- Dyre reparationer
Det er problemer, der er langt dyrere end at forebygge dem.
En lille løsning – der beskytter hele dit afvandingssystem.
Wire ball leaf catch Ø50-110 mm
Wire ball Leaf catch Height: 195 mm Diameter: Ø135 mm Fits: Ø50-125 mm Material: Ø3 mm steel wire coated with polyethylene (PE) The...
View full detailsBlade catch Lightning stainless steel
Leaf catch lightning Fits: Ø50-110 mm Material: Stainless steel wire Ø3 mm The Lyn blade trap is used in vertical roof wells from Ø50 t...
View full detailsBlade catch Universal stainless steel
Leaf catch universal Width: 210 mm Height: 210 mm Thickness: 43 mm Fits: Ø50-160 mm Material: Stainless steel, AISI 304 Leg material...
View full detailsLeaf catch Cylinder Ø75 t/roof well
Leaf catch cylindrical Diameter: Ø75 mm Height: 151 mm Material: Stainless steel AISI 304 (EN 1.4301) Cylinder Blade catch is a cylin...
View full detailsBalcony grate Ø50-110 mm stainless steel
Balcony grating Grid diameter: Ø130 mm Grid height: 11 mm Fits: Ø50-110 mm Material: Stainless steel AISI 304 Balcony grate leaf ca...
View full detailsLeaf catch turbine Ø250 mm cast alu
Blade catch turbine in aluminium Diameter: Ø250 mm Height: 58 mm Fits: Ø50-160 mm Material: Aluminum Legs: Stainless steel with rubber ...
View full detailsLeaf catch Cylinder Ø50 t/roof well
Leaf catch cylindrical Diameter: Ø50 mm Height: 151 mm Material: Stainless steel AISI 304 (EN 1.4301) Cylinder Blade catch is a cylin...
View full detailsWire ball leaf catch large model Ø125-160 mm
Wire ball Leaf catch XL Height: 200 mm Diameter: Ø190 mm Fits: Ø125-160 mm Material: Ø3 mm steel wire coated with polyethylene (PE) ...
View full detailsWire ball galvanized 60-80 mm 2.1/2''
Galvanized wire basket Mounted in the gutter and prevents leaves and branches from getting into the downspout and thus the sewer. Dimension:...
View full detailsLeaf catch Cylinder Ø90 t/roof well
Leaf catch cylindrical Diameter: Ø90 mm Height: 151 mm Material: Stainless steel AISI 304 (EN 1.4301) Cylinder Blade catch is a cylin...
View full detailsLeaf catch Cylinder Ø63 t/roof well
Leaf catch cylindrical Diameter: Ø63 mm Height: 151 mm Material: Stainless steel AISI 304 (EN 1.4301) Cylinder Blade catch is a cylin...
View full detailsLeaf catch Cylinder Ø125 t/roof well
Leaf catch cylindrical Diameter: Ø125 mm Height: 151 mm Material: Stainless steel AISI 304 (EN 1.4301) Cylinder Blade catch is a cylin...
View full detailsBlade catch Horizontal Ø50 flat model w/stainless steel hexagon bolt
Blade catch horizontal - flat Width: 170 mm Height: 125 mm Thickness: 18 mm Fits: Ø50 mm With stainless hexagon bolt Material: Stain...
View full detailsLeaf catch rectangular well for triangular strip stainless steel 304
Leaf trap for rectangular roof well for triangular strip Width: 160 mm Body width: 155 mm Thickness: 102 mm Angle: 45 degrees Fits: Ø7...
View full detailsLeaf catch Lightning XL Ø125-Ø160 mm
Leaf catch lightning XL Fits: Ø125-160 mm Material: Stainless steel wire Ø5 mm The Lyn XL blade catch is used in vertical roof drains f...
View full detailsWire ball galvanized 80-100 mm 4''
Galvanized wire basket Mounted in the gutter and prevents leaves and branches from getting into the downspout and thus the sewer. Dimension:...
View full detailsBlade catch Universal XL stainless steel 325x325 mm
Leaf catch universal XL Width: 325 mm Height: 325 mm Thickness: 43 mm Fits: Ø110-250 mm Material: Stainless steel, AISI 304 Leg mate...
View full detailsBlade catch Horizontal Ø75-90-110 mm stainless steel
Leaf catch horizontal - oblique Width: 230 mm Height: 110 mm Thickness: 80 mm Fits: Ø75-90-110 mm Material: Stainless steel, AISI 304 ...
View full detailsTerrace grate stainless steel height 120-150 mm
Terrace grate adjustable Width: 200 mm Length: 200 mm Height: 120-150 mm Material: Stainless steel AISI 304 Terrace grate is an adj...
View full detailsTerrace grate stainless steel height 60-90 mm
Terrace grate adjustable Width: 200 mm Length: 200 mm Height: 60-90 mm Material: Stainless steel AISI 304 Terrace grate is an adjus...
View full detailsTerrace grate stainless steel height 90-120 mm
Terrace grate adjustable Width: 200 mm Length: 200 mm Height: 90-120 mm Material: Stainless steel AISI 304 Terrace grate is an adju...
View full detailsLeaf catch Monsoon stainless steel
Leaf catch for emergency drainage Length: 210 mm Width: 210 mm Height: 38 mm Fits: Ø50-Ø160 mm Material: Stainless steel ASI304 Appr...
View full detailsLeaf catch Monsoon stainless steel t/emergency drainage
Leaf catch for emergency drainage Length: 210 mm Width: 210 mm Height: 72 mm Material: Stainless steel ASI304 Data sheet
Leaf catch Cylinder Ø160 t/roof well
Leaf catch cylindrical Diameter: Ø60 mm Height: 151 mm Material: Stainless steel AISI 304 (EN 1.4301) Cylinder Blade catch is a cylin...
View full detailsLeaf catch Cylinder Ø145 t/roof well
Leaf catch cylindrical Diameter: Ø145 mm Height: 151 mm Material: Stainless steel AISI 304 (EN 1.4301) Cylinder Blade catch is a cyli...
View full detailsLeaf catch Cylinder Ø110 t/roof well
Leaf catch cylindrical Diameter: Ø110 mm Height: 151 mm Material: Stainless steel AISI 304 (EN 1.4301) Cylinder Blade catch is a cyli...
View full detailsBlade catch Horizontal Ø50 flat model w/wing screw
Blade catch horizontal - flat Width: 170 mm Height: 125 mm Thickness: 18 mm Fits: Ø50 mm With wing screw Material: Stainless steel, ...
View full detailsBlade catch Horizontal Ø50 mm stainless steel
Leaf catch horizontal - oblique Width: 230 mm Height: 110 mm Thickness: 80 mm Fits: Ø50 mm Material: Stainless steel, AISI 304 Leg m...
View full detailsLeaf trap rectangular well t/rectangular tube Ø410-500 mm
Leaf trap for rectangular roof well Width: 645 mm Height: 125 mm Thickness: 10 mm Number of clamps: 2 Fits: Ø410-500 mm Material: 0....
View full detailsLeaf trap rectangular well t/rectangular pipe Ø350-475 mm
Leaf trap for rectangular roof well Width: 545 mm Height: 125 mm Thickness: 10 mm Number of clamps: 2 Fits: Ø350-475 mm Material: 0....
View full detailsLeaf trap rectangular well t/rectangular tube Ø230-375 mm
Leaf trap for rectangular roof well Width: 445 mm Height: 125 mm Thickness: 10 mm Number of clamps: 2 Fits: Ø230-375 mm Material: 0....
View full detailsLeaf trap rectangular well t/rectangular tube Ø180-275 mm
Leaf trap for rectangular roof well Width: 345 mm Height: 125 mm Thickness: 10 mm Number of clamps: 2 Fits: Ø180-275 mm Material: 0....
View full detailsLeaf trap rectangular well t/rectangular tube Ø77-150 mm
Leaf trap for rectangular roof well Width: 220 mm Height: 125 mm Thickness: 10 mm Number of clamps: 1 Fits: Ø77-150 mm Material: 0.8...
View full detailsLeaf catch Horizontal well flat t/Ø75-90-110 mm 10 mm high w/wing screw - Slide bracket
Blade catch horizontal - flat Width: 170 mm Height: 125 mm Thickness: 18 mm Fits: Ø75-90-110 mm With wing screw Material: Stainless ...
View full detailsBlade catch Horizontal well flat t/Ø75-90-110 mm 10 mm high w/hex bolt - Slide fitting
Blade catch horizontal - flat Width: 170 mm Height: 125 mm Thickness: 18 mm Fits: Ø75-90-110 mm With hexagon bolt Material: Stainles...
View full details