Building profiles in aluminum and zinc to special dimensions - See selection and Buy here

Building profiles to measure

Custom-made building profiles are manufactured specifically for your construction, where standard building profiles cannot solve the task, in order to achieve the most optimal protection of your property for many years to come.

By using the correct construction profiles tailored to your specific construction, you secure your building against rain, snow and wind as well as pests such as rats, mice and martens.
Custom-made profiles are made specifically for your needs in quality materials.
Aluminum profiles weigh less than zinc profiles, but they are still strong and durable and can withstand all kinds of weather.

In addition to protection, the construction profiles also give the building a completely new look, and it is a good way to give the house a personal touch.
The building profiles give your home the protection it needs, no matter where it is or what it is exposed to. You can therefore safely use our profiles for your building.

Wide range of building profiles on special dimensions

These can be, for example, corner profiles , water noses, gutters , footings , roof footings , hat profiles , stern caps , wall crowns , glulam coverings and wind sheaths and much more, which must be just a little longer, have a different angle or the like.

Here you can order the profile you need for your construction project on your measurements.

If you have a profile or wish that is not in the shop, you can send us a drawing with measurements here . We will then send you an offer via email as soon as possible.

We have a large and wide selection of standard produced building profiles. There may be special wishes that do not fit into your particular construction project?

If you are in doubt about roof pitch, you can use this file as a guide

Sort by

Compare

View as

Compare

BT70-1-K Glulam profile - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT50-2-K Sole bench with drip nose - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT51-1-K Lightening profile side window without joint stop - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT17-2-K Angle external corner - special measure

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT50-1-K Sole bench without drip nose - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT51-3-K Lightening profile top window with joint stop and possible drip nose - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT12-2-K Capsule drip nose 2 sides - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT80-2-KU profile sharp-edged - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT71-1-K Box - tray - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Note: the height of the edges must be a minimum of 7 mm

Compare

BT15-2-K Drip edge with drip nose - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT10-1-K Roof footing plan - special measurements

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT19-2-K Masonry crown drip nose 1 side - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT12-1-K Capsule plan - special measurements

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT50-3-K Sole bench close to wall - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT16-3-K Chin profile drip nose z-profile unventilated - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT17-1-K Angle inside corner - special measure

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT13-2-K Loose edge with drip nose - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT11-1-K Edge plate plan - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT52-3-K Corner profile exterior - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT19-1-K Masonry crown plan - special measurements

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT15-1-K Drip edge plane - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT54-1-K Hat profile connector - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Note: My width of no. 3 must be 54 mm

Compare

BT31-4-K Wind scoop drip nose bevelled edge - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT30-2-K Stern panel plan oblique or perpendicular notching - special measurements

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT18-1-K Blind rebate - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT16-1-K Chin profile flat z-profile unventilated - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT80-1-KU profile with bend - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT20-1-K Walking stern channel over battens - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT19-3-K Masonry crown drip nose 2 sides - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT16-4-K Chin profile drip nose z-profile ventilated - special dimensions

51,63 kr - 1.025,00 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT15-5-K Vandnæse med drypnæse uden forsæt - specialmål

BT15-5-K Water nozzle with drip nozzle without front - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT15-3-K Water nose plan - special measurements

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT10-2-K Roof base - base plate drip nose - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Our configurable Footblik with drip nose in zinc, copper or aluminum is a widely used roof foot for covering wood and edges around the roof in the ...

View full details

Compare

BT51-2-K Clearing profile side window with joint stop - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT53-2-K Corner profile narrow slant - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the rig...

View full details

Compare

BT52-1-K External corner profile - special dimensions

51,63 kr - 737,50 kr

51,63 kr

Expected delivery time: 2-7 working days Specially manufactured profile according to the entered specifications, the product is exempt from the r...

View full details

Building profiles special measurements

Filters

Building profiles to measure

Wide range of building profiles on special dimensions

Language

Language

Compare products