Roof caps & Coverings
Filters
- Alkorplan top/Thermoplan TPO (3)
- Alkorplan/Alkorplan F dark (4)
- Alkorplan/Alkorplan F light (4)
- Alkorplan/Protan G dark (4)
- Alkorplan/Protan G light (4)
- Blackened aluminum flange (2)
- Fast flash (3)
- Fixed flash (34)
- Flange (21)
- Perform (1)
- Roofing board (3)
- Sarnafil-T/Sarnafil-T light (4)
- Sarnafil/Sarnafil SF dark (4)
- Sarnafil/Sarnafil SF light (4)
- Steel/APP (4)
- Steel/Derbigum (4)
- Steel/SBS (4)
- Steel/Steel flange (4)
- Super seal/Thermobond EPDM (4)
- Tagpap (1)
Roof caps and flashings
Does your home need better ventilation or is it dripping in at your roof hood?
We have everything in roof hoods and roof ventilation . A roof hood is the same as an exhaust hood. A roof cap is an end and exit on your roof from a ventilation duct. Often the ventilation duct is connected to an electrical installation in your home, such as dryer, hood, ventilation in bathroom, etc.
What is roofing?
Roof covering is the part of the roof where the primary roofing material does not cover. It can be at dormers, skylights, chimneys, etc. It can be made as hidden or visible coverings, it depends on whether you place it above or below the roof.
Shedlock klipfisk Ø75 mm ventilation hood for roofing felt roof black front stainless steel w/black
Shedlock/rockfish with bitumen ink Width: 230 mm Length: 300 mm Height: 60 mm Connection: Ø75 mm Venting area: 25 cm2 Material: Stai...
View full detailsShedlock klipfisk Ø110 mm low ventilation hood for roofing felt roof black front stainless steel w/black
Shedlock/rockfish with bitumen ink Width: 230 mm Length: 300 mm Height: 60 mm Connection: Ø110 mm Venting area: 50 cm2 Material: Sta...
View full detailsVentilation hood Ø160 flat roof Black with integrated roofing felt With condensation device
Ventilation hood with roofing felt and condensation insert Diameter: Ø160 mm Roof type: Flat roof Roof slope: 0-7 degrees Material: Alum...
View full detailsShedlock klipfisk Ø110 mm XL ventilation hood for roofing felt roof black front stainless steel w/black
Shedlock/rockfish with bitumen ink Width: 375 mm Length: 475 mm Height: 86 mm Connection: Ø110 mm Venting area: 62 cm2 Material: Sta...
View full detailsPLASTIGEN Exhaust hood 200x200 mm ASA for roofing felt with removable top
Extractor hood with removable top Dimension bottom: 405x405 mm Dimension top: 265x265 mm Height: 375 mm Material: ASA plastic Colour B...
View full detailsPLASTIGEN Exhaust hood 200x200 mm ASA for roofing felt with removable top insulated
Extractor hood insulated with removable top Dimension bottom: 405x405 mm Dimension top: 265x265 mm Height: 375 mm Material: ASA plastic ...
View full detailsAltech Fast Flash roofing 5000x560 mm Brick red
Self-adhesive roof covering Thickness: 2.1 mm - ÷0.1 - +0.3 mm Density: 1913 kg/m3 corresponding to 3.5 kg/m2 The tolerance on width and l...
View full detailsVentilation hood Ø125 flat roof Black with integrated roofing felt With condensation device
Ventilation hood with roofing felt and condensation insert Diameter: Ø125 mm Roof type: Flat roof Roof slope: 0-7 degrees Material: Alum...
View full detailsPLASTIGEN Exhaust hood US flat 200x200 mm ASA for roofing felt w/removable top insulated
Extractor hood insulated Dimension: 200x200 mm Height: 28.5 cm Material: ASA plastic Tilt: 11-55 degrees Insulation: 15 mm mineral woo...
View full detailsExtractor hood US smig 200x200 mm black lacquered aluminum w/removable insulated top
Extractor hood insulated Dimension: 200x200 mm Height: 28.5 cm Material: Aluminum Colour Black Tilt: 11-55 degrees Insulation: 15 mm...
View full detailsExhaust hood 200x200 mm Stainless steel 0.5 mm with removable top
Extractor hood insulated Dimension: 200x200 mm Height: 30 cm Material: Stainless steel, AISI 304 The exhaust hood is mounted where th...
View full detailsPLASTIGEN drop stem covering Ø90 mm plug-in model fits in Ø110 mm pipe
Fall trunk cover insert Diameter: Ø90 mm Material: Black PVC plastic Downspout covering with double pipe has a movable pipe for inser...
View full detailsØland China hood KH-100 Ø100
China hood / ventilation hood Diameter: 100 mm Material: Steel With Nipple Used for fresh air intake or return hood Specifications
Altech Fast Flash roofing 5000x280 mm Grey
Self-adhesive roof covering Thickness: 2.1 mm - ÷0.1 - +0.3 mm Density: 1913 kg/m3 corresponding to 3.5 kg/m2 The tolerance on width and l...
View full detailsFall trunk cover ventilation Ø75 mm 45 degrees w/grey Fast Flash
Fall trunk covering Material: Zinc Diameter: 75 mm Roof slope: 45 degrees Colour: Gray fastflash flange Material: Used for coveri...
View full detailsExhaust hood 200x200 mm 0.8 mm zinc 14 with removable top
Extractor hood insulated Dimension: 200x200 mm Height: 30 cm Material: Zinc 14 The exhaust hood is mounted where the roof surface is ...
View full detailsPLASTIGEN Exhaust hood US flat 200x200 mm ASA for roofing felt w/removable top
Exhaust hood Dimension: 200x200 mm Height: 28.5 cm Material: ASA plastic Tilt: 11-55 degrees The exhaust hood is mounted where the ...
View full detailsFall trunk cover Ø75 mm w/ sliding piece zinc 14 t/Ø75 mm pipe
Fall trunk covering Diameter: Ø75 mm Material: Zinc no. 14 Downspout covering with double pipe has a movable pipe for insertion into ...
View full detailsPLASTIGEN drop stem cover w/double tube Ø90/63 mm fits t/Ø75 mm tube black
Fall trunk covering Diameter: Ø90/63 mm Material: Black PVC plastic Downspout covering with double pipe has a movable pipe for insert...
View full detailsPLASTIGEN fall stem cover Ø63 mm plug-in model fits in Ø75 mm pipe
Fall trunk cover insert Diameter: Ø63 mm Material: Black PVC plastic The double-pipe gutter covering has a movable pipe for insertion...
View full detailsPLASTIGEN drop stem cover Ø40 mm plug-in model fits in Ø50 mm pipe
Fall trunk cover insert Diameter: Ø40 mm Material: Black PVC plastic Downspout covering with double pipe has a movable pipe for inser...
View full detailsVent top t/Ø63 mm pipe stainless steel rain proof
Vent stop for drop stem covering Diameter: Ø63 mm Rain proof Material: Acid-resistant stainless steel AISI 316 The venting stop is ...
View full detailsInsert fall stem 90x300/90x250 Steel/Derbigum O-ring Ø90x10 mm
Insert drop stem covering Dimension: 90x300/90x250 mm O-ring: Ø90x10 mm Material: Stainless steel AISI 304 Diaphragm type: Steel/Derbigu...
View full detailsRoof covering Ø300 mm 11-32 degrees Perforated aluminum flange blackened incl. standard clamping collar
Aluminum roofing Dimension: Ø300 mm Angle: 11-32 degrees Colour: Glossy Material tube/protection ring: Acid-resistant steel AISI 316 M...
View full detailsRoof covering Ø140 mm 0-10 degrees Perforated aluminum flange blackened including standard clamping collar
Aluminum roofing Dimension: Ø140 mm Angle: 0-10 degrees Colour: Glossy Material tube/protection ring: Acid-resistant steel AISI 316 Fl...
View full detailsFall stem ventilation Ø75 10-45 degrees fixed flatter Zinc fixed flash black Double tube
Fall trunk ventilation double pipe zinc with black fixed flash Material: Zinc no. 14 Cover: Black fixed flash Diameter: Ø75 mm Roof slop...
View full detailsExhaust hood 300x300 mm 0.8 mm zinc 14 with removable top, insulated
Extractor hood insulated Dimension: 300x300 mm Height: 30 cm Material: Zinc 14 Insulation: 15 mm mineral wool The exhaust hood is m...
View full detailsExtractor hood US smig 200x200 mm black lacquered aluminum w/removable top
Exhaust hood Dimension: 200x200 mm Height: 28.5 cm Material: Aluminum Colour Black Tilt: 11-55 degrees The exhaust hood is mounte...
View full detailsExtractor hood 200x200 mm black-lacquered aluminum w/removable insulated top
Extractor hood insulated Dimension: 200x200 mm Height: 28.5 cm Material: Aluminum Colour Black Insulation: 15 mm mineral wool The...
View full detailsExtractor hood US smig 200x200 mm zinc 14 with removable top
Exhaust hood Dimension: 200x200 mm Height: 28.5 cm Material: Zinc 14 Tilt: 11-55 degrees The exhaust hood is mounted where the roof...
View full detailsExhaust hood 200x200 mm 0.8 mm zinc 14 with removable top, insulated
Extractor hood insulated Dimension: 200x200 mm Height: 30 cm Material: Zinc 14 Insulation: 15 mm mineral wool The exhaust hood is m...
View full detailsFall trunk covering Ø110 mm w/ sliding piece zinc 14 t/Ø110 mm pipe
Fall trunk covering Diameter: Ø110 mm Material: Zinc no. 14 Downspout covering with double pipe has a movable pipe for insertion into...
View full detailsPLASTIGEN fall stem cover Ø80 mm plug-in model fits in Ø90 mm pipe
Fall trunk cover insert Diameter: Ø80 mm Material: Black PVC plastic Downspout covering with double pipe has a movable pipe for inser...
View full detailsVent top t/Ø75 mm stainless steel tube
Vent stop for drop stem covering Diameter: Ø75 mm Material: Acid-resistant stainless steel AISI 316 The venting stop is mounted on to...
View full detailsSliding drop stem 130/125/90 Steel/SBS O-ring Ø86x12 mm
Drop stem slide/double tube Dimension: 130/125/90 mm O-ring: Ø86x12 mm Material: Stainless steel AISI 304 Diaphragm type: Steel/SBS ...
View full detailsSliding drop stem 130/125/75 Steel/Derbigum O-ring Ø75x8 mm
Drop stem slide/double tube Dimension: 130/125/75 mm O-ring: Ø75x8 mm Material: Stainless steel AISI 304 Diaphragm type: Steel/Derbigum ...
View full details