Skip to content
Direkte levering 1-3 hverdage på standard og 3-7 på specialvarer.
Direkte levering 1-3 hverdage på standard og 3-7 på specialvarer.

Roof drainage

Filters

Gutters and downspouts for your house

Does your house or property need new gutters and downspouts?

A gutter is the gutter at the base of the roof that has the function of collecting rainwater from the roof and via a slight drop in the gutter to lead the water to the downpipe and on to the bed, faskine or sewer for proper roof drainage.

Climate change and increasing amounts of precipitation place great demands on your rainwater solution, so that you avoid unnecessary moisture and water damage to the facade and plinth.

Depending on where in the country the house is located, sooner or later it may be appropriate to replace the gutters and downpipes.
Gutters may begin to look worn, while others may develop leaks.
Or you have to change the roof, and thus a change of color might be the best solution.

Large selection of gutters and downpipes

We have a large selection of gutters, downspouts and all accessories for correct setup and installation.

We have gutter systems with all accessories in zinc , aluminium , copper , plastic and steel .

Blikshop.dk recommends replacing gutter iron or bracket iron in connection with the replacement of gutters. This is both to get some fresh ones, to hold the new gutters, but also because the old gutters, even if you choose the same manufacturer, may have been discontinued and replaced with new improved gutters or bracket irons. And it also looks good when your entire gutter system is new.

We carry products from all the leading manufacturers of solutions for roof drainage.

Including Rheinzink, VMZINC, Lindab, Plastmo, Prefa, and more.

Galvanized wooden hinge pin Ø76 mm

51,00 kr - 51,00 kr
51,00 kr
51,00 kr - 51,00 kr
51,00 kr

Hinge pin for installing downpipes on wood Width: 76 mm Assembly: Wood Distance from wall to edge bracket is 35 mm Incl. eye screw Sui...

View full details
51,00 kr - 51,00 kr
51,00 kr
51,00 kr - 51,00 kr
51,00 kr

Wire ball leaf catch Ø50-110 mm

181,00 kr - 181,00 kr
181,00 kr
181,00 kr - 181,00 kr
181,00 kr

Wire ball Leaf catch Height: 195 mm Diameter: Ø135 mm Fits: Ø50-125 mm Material: Ø3 mm steel wire coated with polyethylene (PE) The...

View full details
181,00 kr - 181,00 kr
181,00 kr
181,00 kr - 181,00 kr
181,00 kr

Rheinzink gutter glue Weicon Flex gray 310 ml

165,82 kr - 165,82 kr
165,82 kr
165,82 kr - 165,82 kr
165,82 kr

Rheinzink glue Weicon Flex for end caps Manufacturer: Rheinzink Contents: 310 ml Colour: Grey Product type: Glue Used for gluing gutters and e...

View full details
165,82 kr - 165,82 kr
165,82 kr
165,82 kr - 165,82 kr
165,82 kr

Rheinzink End base left 280 mm 1/2-round walzblank

8,64 kr - 8,64 kr
8,64 kr
8,64 kr - 8,64 kr
8,64 kr

Bottom end Manufacturer: Rheinzink Material: Zinc Surface: Smooth Mounting: Left Colour: Walzblank Width: 280 mm Size: 11 Shape: Semi-round ...

View full details
8,64 kr - 8,64 kr
8,64 kr
8,64 kr - 8,64 kr
8,64 kr

Rheinzink End bottom right 280 mm 1/2-round walzblank

8,64 kr - 8,64 kr
8,64 kr
8,64 kr - 8,64 kr
8,64 kr

Bottom end Manufacturer: Rheinzink Material: Zinc Surface: Smooth Mounting: Right Color: walzblank Width: 280 mm Size: 11 Shape: Semi-round ...

View full details
8,64 kr - 8,64 kr
8,64 kr
8,64 kr - 8,64 kr
8,64 kr

Rheinzink Gutter 1/2-round no. 11 walzblank 0.7x280 mm - 3 meters

259,00 kr - 259,00 kr
259,00 kr
259,00 kr - 259,00 kr
259,00 kr

Gutter semi-round Manufacturer: Rheinzink Material: Zinc Surface: Smooth Surface type: Walsblank Width: 280 mm Size: 11 Material thickness: 0.70 m...

View full details
259,00 kr - 259,00 kr
259,00 kr
259,00 kr - 259,00 kr
259,00 kr

Rheinzink knurled loose 0.7x300 mm walzblank

24,54 kr - 24,54 kr
24,54 kr
24,54 kr - 24,54 kr
24,54 kr

Fix swollen gutters Manufacturer: Rheinzink Material: Zinc Product type: Collections Colour: Walzblank Surface: Smooth Length: 300 mm Thickness:...

View full details
24,54 kr - 24,54 kr
24,54 kr
24,54 kr - 24,54 kr
24,54 kr

Blade catch Lightning stainless steel

45,00 kr - 45,00 kr
45,00 kr
45,00 kr - 45,00 kr
45,00 kr

Leaf catch lightning Fits: Ø50-110 mm Material: Stainless steel wire Ø3 mm The Lyn blade trap is used in vertical roof wells from Ø50 t...

View full details
45,00 kr - 45,00 kr
45,00 kr
45,00 kr - 45,00 kr
45,00 kr

Rheinzink spout piece 1/4-round 0.7x333x200 mm walzblank

205,34 kr - 205,34 kr
205,34 kr
205,34 kr - 205,34 kr
205,34 kr

Spout for quarter round gutter Manufacturer: Rheinzink Material: Zinc Colour: Walzblank Length: 200 mm Width: 333 mm Thickness: 0.7 mm Diameter ...

View full details
205,34 kr - 205,34 kr
205,34 kr
205,34 kr - 205,34 kr
205,34 kr

Rheinzink end base left 1/4-round 0.7x333x500 mm walzblank

166,10 kr - 166,10 kr
166,10 kr
166,10 kr - 166,10 kr
166,10 kr

End base for quarter-round gutter Manufacturer: Rheinzink Material: Zinc Colour: Walzblank Mounting: Left Length: 500 mm Width: 333 mm Thickness...

View full details
166,10 kr - 166,10 kr
166,10 kr
166,10 kr - 166,10 kr
166,10 kr

Rheinzink end base right 1/4-round 0.7x333x500 mm walzblank

166,10 kr - 166,10 kr
166,10 kr
166,10 kr - 166,10 kr
166,10 kr

End base for quarter-round gutter Manufacturer: Rheinzink Material: Zinc Colour: Walzblank Mounting: Right Length: 500 mm Width: 333 mm Thicknes...

View full details
166,10 kr - 166,10 kr
166,10 kr
166,10 kr - 166,10 kr
166,10 kr

Rheinzink spout piece walsblank 280 mm Ø76 mm

231,86 kr - 231,86 kr
231,86 kr
231,86 kr - 231,86 kr
231,86 kr

Spout for gutter Manufacturer: Rheinzink Material: Zinc Product type: Collections Colour: Walzblank Width: 280 mm Diameter: 76 mm Thickness: 0.7...

View full details
231,86 kr - 231,86 kr
231,86 kr
231,86 kr - 231,86 kr
231,86 kr

Rheinzink gutter architect 1/4 round walzblank 0.7x333 mm - 3 meters Glue system

756,10 kr - 756,10 kr
756,10 kr
756,10 kr - 756,10 kr
756,10 kr

Roofing architect quarter round Manufacturer: Rheinzink Material: Zinc Color: walzblank Width: 333 mm Material thickness: 0.7 mm Shape: Quarter ...

View full details
756,10 kr - 756,10 kr
756,10 kr
756,10 kr - 756,10 kr
756,10 kr

Gutter short 1/2 round 11"/280 mm - Used for Rheinzink and VM Zinc

25,00 kr - 25,00 kr
25,00 kr
25,00 kr - 25,00 kr
25,00 kr

Gutter short Suitable for: Rheinzink and VM Zinc Width: 280 mm Gutter: 1/2 round Material: Steel 37-2 EN10025, M certificate 10204 Rivets: Alumi...

View full details
25,00 kr - 25,00 kr
25,00 kr
25,00 kr - 25,00 kr
25,00 kr

Rheinzink pipe holder 76 mm t/wall with stainless screw walzblank

30,87 kr - 30,87 kr
30,87 kr
30,87 kr - 30,87 kr
30,87 kr

Pipe holder for downspouts Manufacturer: Rheinzink Material: Zinc Surface type: Walzblank Diameter: 76 mm Note: With stainless screw. Supplied...

View full details
30,87 kr - 30,87 kr
30,87 kr
30,87 kr - 30,87 kr
30,87 kr

Blade catch Universal stainless steel

305,00 kr - 305,00 kr
305,00 kr
305,00 kr - 305,00 kr
305,00 kr

Leaf catch universal Width: 210 mm Height: 210 mm Thickness: 43 mm Fits: Ø50-160 mm Material: Stainless steel, AISI 304 Leg material...

View full details
305,00 kr - 305,00 kr
305,00 kr
305,00 kr - 305,00 kr
305,00 kr

VM Zinc downpipe 0.7 mm copper Ø76 mm - 3 meters

862,68 kr - 862,68 kr
862,68 kr
862,68 kr - 862,68 kr
862,68 kr

Downpipe with sleeve, welded Manufacturer: VM Zinc Material: Copper Diameter: 76 mm Length: 3 meters Thickness: 0.7 mm

862,68 kr - 862,68 kr
862,68 kr
862,68 kr - 862,68 kr
862,68 kr

Leaf catch Cylinder Ø75 t/roof well

187,00 kr - 187,00 kr
187,00 kr
187,00 kr - 187,00 kr
187,00 kr

Leaf catch cylindrical Diameter: Ø75 mm Height: 151 mm Material: Stainless steel AISI 304 (EN 1.4301) Cylinder Blade catch is a cylin...

View full details
187,00 kr - 187,00 kr
187,00 kr
187,00 kr - 187,00 kr
187,00 kr

Rheinzink pin t/pipe holder with thread 100 mm galvanized steel

15,00 kr - 15,00 kr
15,00 kr
15,00 kr - 15,00 kr
15,00 kr

Pin for pipe holder with thread, used together with pipe holder Ø76 mm Manufacturer: Rheinzink Material: Steel Surface: Galvanized Length: 100 m...

View full details
15,00 kr - 15,00 kr
15,00 kr
15,00 kr - 15,00 kr
15,00 kr

Rheinzink bend 72 degrees Ø76 mm walzblank

64,02 kr - 64,02 kr
64,02 kr
64,02 kr - 64,02 kr
64,02 kr

Bending for gutter Manufacturer: Rheinzink Material: Zinc Surface type: Walzblank Width: 76 mm Grades: 72 Shape: Round Installation instruct...

View full details
64,02 kr - 64,02 kr
64,02 kr
64,02 kr - 64,02 kr
64,02 kr

Rheinzink manhole collar Ø116/87 mm walzblank - for PVC

18,75 kr - 18,75 kr
18,75 kr
18,75 kr - 18,75 kr
18,75 kr

Well collar with hole Manufacturer: Rheinzink Material: Zinc Outer diameter: 118 mm Inner diameter: 116 mm Hole diameter: 87 mm Height: 32 mm Su...

View full details
18,75 kr - 18,75 kr
18,75 kr
18,75 kr - 18,75 kr
18,75 kr

Hinge pin copper Ø76 mm for wood

201,59 kr - 201,59 kr
201,59 kr
201,59 kr - 201,59 kr
201,59 kr

Hinge pin for downpipe Manufacturer: KME Material: Copper Tube diameter: 76 mm Thickness: 30 mm Material thickness: 2 mm Used for: Wood

201,59 kr - 201,59 kr
201,59 kr
201,59 kr - 201,59 kr
201,59 kr

Rz and VM 1/4 Round Console Iron Dim. 333

41,00 kr - 41,00 kr
41,00 kr
41,00 kr - 41,00 kr
41,00 kr

The plumber's tip! What distance should there be between brackets? You can calculate it in 2 ways: Bracket iron is installed every 60 cm...

View full details
41,00 kr - 41,00 kr
41,00 kr
41,00 kr - 41,00 kr
41,00 kr

Galvanized wooden hinge pin Ø87 mm

42,00 kr - 42,00 kr
42,00 kr
42,00 kr - 42,00 kr
42,00 kr

Hinge pin for installing downpipes on wood Diameter: 87 mm Assembly: Wood Distance from wall to edge bracket is 35 mm Incl. eye screw ...

View full details
42,00 kr - 42,00 kr
42,00 kr
42,00 kr - 42,00 kr
42,00 kr

Hinge pin galvanized wall Ø76 mm

35,00 kr - 35,00 kr
35,00 kr
35,00 kr - 35,00 kr
35,00 kr

Hinge pin for installing downspouts in walls Diameter: 76 mm Length of seam: 108 mm Including eye screw Suitable for Rheinzink and VM Zi...

View full details
35,00 kr - 35,00 kr
35,00 kr
35,00 kr - 35,00 kr
35,00 kr

VM hinge pin 80 mm for wood anthra

112,53 kr - 112,53 kr
112,53 kr
112,53 kr - 112,53 kr
112,53 kr

Expected delivery time: 1-3 working days

112,53 kr - 112,53 kr
112,53 kr
112,53 kr - 112,53 kr
112,53 kr

Balcony grate Ø50-110 mm stainless steel

252,00 kr - 252,00 kr
252,00 kr
252,00 kr - 252,00 kr
252,00 kr

Balcony grating Grid diameter: Ø130 mm Grid height: 11 mm Fits: Ø50-110 mm Material: Stainless steel AISI 304 Balcony grate leaf ca...

View full details
252,00 kr - 252,00 kr
252,00 kr
252,00 kr - 252,00 kr
252,00 kr

Wire ball galvanized 60-80 mm 2.1/2''

95,00 kr - 95,00 kr
95,00 kr
95,00 kr - 95,00 kr
95,00 kr

Galvanized wire basket Mounted in the gutter and prevents leaves and branches from getting into the downspout and thus the sewer. Dimension:...

View full details
95,00 kr - 95,00 kr
95,00 kr
95,00 kr - 95,00 kr
95,00 kr

PREFA Downpipe aluminum 0.7x80 mm - 3 meters black P10 light structure

429,68 kr - 429,68 kr
429,68 kr
429,68 kr - 429,68 kr
429,68 kr

Downpipe round Manufacturer: PREFA Material: Aluminum Colour Black Surface: Nupret P10 Diameter: 80 mm Thickness: 0.7 mm Length: 3...

View full details
429,68 kr - 429,68 kr
429,68 kr
429,68 kr - 429,68 kr
429,68 kr

Pin w/thread for pipe holder galvanized steel

12,00 kr - 12,00 kr
12,00 kr
12,00 kr - 12,00 kr
12,00 kr

Pin with givnd for pipe holder

12,00 kr - 12,00 kr
12,00 kr
12,00 kr - 12,00 kr
12,00 kr

Rheinzink manhole collar Ø150/76 mm walzblank

24,92 kr - 24,92 kr
24,92 kr
24,92 kr - 24,92 kr
24,92 kr

Well collar with hole Manufacturer: Rheinzink Material: Zinc Outer diameter: 152 mm Inner diameter: 150 mm Hole diameter: 76 mm Height: 40 mm Su...

View full details
24,92 kr - 24,92 kr
24,92 kr
24,92 kr - 24,92 kr
24,92 kr

Leaf catch Cylinder Ø50 t/roof well

187,00 kr - 187,00 kr
187,00 kr
187,00 kr - 187,00 kr
187,00 kr

Leaf catch cylindrical Diameter: Ø50 mm Height: 151 mm Material: Stainless steel AISI 304 (EN 1.4301) Cylinder Blade catch is a cylin...

View full details
187,00 kr - 187,00 kr
187,00 kr
187,00 kr - 187,00 kr
187,00 kr

Leaf catch turbine Ø250 mm cast alu

416,00 kr - 416,00 kr
416,00 kr
416,00 kr - 416,00 kr
416,00 kr

Blade catch turbine in aluminium Diameter: Ø250 mm Height: 58 mm Fits: Ø50-160 mm Material: Aluminum Legs: Stainless steel with rubber ...

View full details
416,00 kr - 416,00 kr
416,00 kr
416,00 kr - 416,00 kr
416,00 kr

Roof well Ø75x250 mm for roofing felt

428,00 kr - 428,00 kr
428,00 kr
428,00 kr - 428,00 kr
428,00 kr

Roof well for vertical installation on roofing felt Width: 500 mm Depth: 500 mm Diameter: 75 mm Height: 250 mm Oring: 8 mm Material:...

View full details
428,00 kr - 428,00 kr
428,00 kr
428,00 kr - 428,00 kr
428,00 kr

VM Zinc downpipe 0.7 mm copper Ø87 mm - 3 meters

842,93 kr - 842,93 kr
842,93 kr
842,93 kr - 842,93 kr
842,93 kr

Downpipe with sleeve, welded Manufacturer: VM Zinc Material: Copper Diameter: 87 mm Length: 3 meters Thickness: 0.7 mm

842,93 kr - 842,93 kr
842,93 kr
842,93 kr - 842,93 kr
842,93 kr

Bend copper 72 degrees Ø76 mm

147,00 kr - 147,00 kr
147,00 kr
147,00 kr - 147,00 kr
147,00 kr

Bending for gutter Manufacturer: KME Material: Copper Diameter: 76 mm Grades: 72 Shape: Round

147,00 kr - 147,00 kr
147,00 kr
147,00 kr - 147,00 kr
147,00 kr

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare