WÜTOP sealing tape EURASOL Thermo HT 60 mm 25 meters
Yderligere produktbeskrivelse
Self-adhesive sealing tape EURASOL Thermo HT
- Color: White
- Width: 60 mm
- Length: 25 metres
- Backing material: Special foil
- Adhesive base: Polyacrylic
- Min./max. processing temperature: -10 to 40 °C
- Min./max. temperature resistance: -30 to 120 °C
- Resistance to ultraviolet light: 12 months, sunlight, Central Europe
- Solvent free: Yes
- Shelf life from production/conditions: 0 Month/Months / in sealed packaging under normal climatic conditions
- Sustainability: Low-emission/low-pollution
Field of application
Foil surfaces:
Permanent adhesion of false ceilings, especially Wütop thermal foil. Also for vapor barriers and vapor brakes as well as for facade membranes. Adhesion of overlapping sections of these foils as well as connections and openings. Repair of damage to underroof foils.
Panel surfaces:
Together with Eurasol AdhesionPlus or spray primer for adhesive bonding and joint bonding of soft chipboards and for adhesive bonding of base joints. Airtight butt joint of OSB boards.
When attaching underlay boards (overlap and/or joint attachment), the width of the membrane must be at least 100 mm, according to the data sheet from the German Central Organization for Roofing.
Suitable for outdoor and indoor use.
Instructions
Attach Eurasol Thermo HT to the overlapping joint by removing just a few centimeters of the backing paper. When the masking paper is peeled off, the tape adheres along its entire length when pressed. Always ensure sufficient contact pressure. After sticking, cut the self-adhesive tape with a knife.
Tape with extremely high adhesive strength for demanding airtight and windproof sealing both indoors and outdoors. Strong adhesive film for permanent adhesion to many materials, especially Wütop thermal membranes.
Special adhesive formulation, strong adhesive film
Extremely strong initial and permanent adhesive strength on many base materials, especially Wütop thermal membranes
Safe gluing down to -10 °C.
Without solvents
High quality special foil
Excellent temperature resistance of up to +120 °C
Excellent adhesion properties, therefore even greater adhesive strength
Adapts perfectly to openings
Scrim material protects against overstretching
Note
Eurasol Thermo HT is ideal for adhering WÜTOP roof protection films, WÜTOP vapor barriers and WÜTOP vapor retarders and has been tested on these films. We therefore recommend that you use these WÜTOP foils to achieve an optimal result. The base material must be dry and free of grease, shavings and dust. Make sure that standing water cannot collect within the glued area. Do not place the glued membrane under continuous tension.
EMICODE EC1plus: Very low emission: The EMICODE system makes it possible to assess the product's impact on the indoor climate in a building. Products with very low emissions are marked with EC1plus.
The instructions for use are recommendations based on tests we have carried out and on our experience. It is recommended that you do a test yourself before use. For further information, refer to the technical data sheet. Due to the large number of storage and application options, a specific result is not guaranteed. If our free customer service provides technical information or assists in an advisory service, this service is provided without any liability, unless the advice or information falls within our stated, contractually agreed scope of services, or the customer service employee has acted intentionally. We guarantee that our products have a uniform quality. We reserve the right to make technical changes and improvements.
The product is included in the database for construction products that can be used in Swan-labelled construction.
| Enhed | PCS |
|---|---|
| Fragt | 85 kroner |
| Dybde | etc |