Skip to content
Direkte levering 1-3 hverdage på standard og 3-7 på specialvarer.
Direkte levering 1-3 hverdage på standard og 3-7 på specialvarer.

Roof drainage

Filters

Gutters and downspouts for your house

Does your house or property need new gutters and downspouts?

A gutter is the gutter at the base of the roof that has the function of collecting rainwater from the roof and via a slight drop in the gutter to lead the water to the downpipe and on to the bed, faskine or sewer for proper roof drainage.

Climate change and increasing amounts of precipitation place great demands on your rainwater solution, so that you avoid unnecessary moisture and water damage to the facade and plinth.

Depending on where in the country the house is located, sooner or later it may be appropriate to replace the gutters and downpipes.
Gutters may begin to look worn, while others may develop leaks.
Or you have to change the roof, and thus a change of color might be the best solution.

Large selection of gutters and downpipes

We have a large selection of gutters, downspouts and all accessories for correct setup and installation.

We have gutter systems with all accessories in zinc , aluminium , copper , plastic and steel .

Blikshop.dk recommends replacing gutter iron or bracket iron in connection with the replacement of gutters. This is both to get some fresh ones, to hold the new gutters, but also because the old gutters, even if you choose the same manufacturer, may have been discontinued and replaced with new improved gutters or bracket irons. And it also looks good when your entire gutter system is new.

We carry products from all the leading manufacturers of solutions for roof drainage.

Including Rheinzink, VMZINC, Lindab, Plastmo, Prefa, and more.

West Jutland Fitting copper Hinge pin for wood 87 mm

231,10 kr - 231,10 kr
231,10 kr
231,10 kr - 231,10 kr
231,10 kr

Expected delivery time: 1-3 working days

231,10 kr - 231,10 kr
231,10 kr
231,10 kr - 231,10 kr
231,10 kr

PREFA Bend aluminum black P10 Ø80 mm 85 degrees

241,00 kr - 241,00 kr
241,00 kr
241,00 kr - 241,00 kr
241,00 kr

Bending for downpipe Manufacturer: PREFA Material: Aluminum Colour Black Surface: P10 nupret Diameter: 80 mm Angle: 85 degree...

View full details
241,00 kr - 241,00 kr
241,00 kr
241,00 kr - 241,00 kr
241,00 kr

Pipe holder for wall Ø80 mm prePatina blaugrau stainless screw

36,00 kr - 36,00 kr
36,00 kr
36,00 kr - 36,00 kr
36,00 kr

Pipe holder Diameter: 80 mm

36,00 kr - 36,00 kr
36,00 kr
36,00 kr - 36,00 kr
36,00 kr

PREFA Hinge pin RAL 9005 black Ø80 mm without mandrel w/thread

88,83 kr - 88,83 kr
88,83 kr
88,83 kr - 88,83 kr
88,83 kr

Hinge pin Fits: PREFA Material: Aluminum Colour: RAL9005 black Diameter: 80 mm Shape: Round

88,83 kr - 88,83 kr
88,83 kr
88,83 kr - 88,83 kr
88,83 kr

Rheinzink pipe holder wall prePatina blaugrau Ø80 mm stainless screw. Remember stick

36,00 kr - 36,00 kr
36,00 kr
36,00 kr - 36,00 kr
36,00 kr

Pipe holder without pin Diameter: 80 mm Surface: prePatina blaugrau Manufacturer: Rheinzink Remember stick

36,00 kr - 36,00 kr
36,00 kr
36,00 kr - 36,00 kr
36,00 kr

Rheinzink bend 60 degrees Ø76 mm walzblank

52,88 kr - 52,88 kr
52,88 kr
52,88 kr - 52,88 kr
52,88 kr

Bending for gutter Manufacturer: Rheinzink Material: Zinc Surface type: Walzblank Width: 76 mm Degrees: 60 Shape: Round Installation instruc...

View full details
52,88 kr - 52,88 kr
52,88 kr
52,88 kr - 52,88 kr
52,88 kr

Rheinzink expansion piece 280x0.8x260 mm 1/2-round walzblank

83,23 kr - 83,23 kr
83,23 kr
83,23 kr - 83,23 kr
83,23 kr

Expansion piece for gutter Manufacturer: Rheinzink Colour: Walzblank Surface: Smooth Product type: Collections Width: 280 mm Length: 260 mm Thick...

View full details
83,23 kr - 83,23 kr
83,23 kr
83,23 kr - 83,23 kr
83,23 kr

Wire ball leaf catch large model Ø125-160 mm

286,00 kr - 286,00 kr
286,00 kr
286,00 kr - 286,00 kr
286,00 kr

Wire ball Leaf catch XL Height: 200 mm Diameter: Ø190 mm Fits: Ø125-160 mm Material: Ø3 mm steel wire coated with polyethylene (PE) ...

View full details
286,00 kr - 286,00 kr
286,00 kr
286,00 kr - 286,00 kr
286,00 kr

Leaf catch Lightning XL Ø125-Ø160 mm

193,00 kr - 193,00 kr
193,00 kr
193,00 kr - 193,00 kr
193,00 kr

Leaf catch lightning XL Fits: Ø125-160 mm Material: Stainless steel wire Ø5 mm The Lyn XL blade catch is used in vertical roof drains f...

View full details
193,00 kr - 193,00 kr
193,00 kr
193,00 kr - 193,00 kr
193,00 kr

VM Zinc gutter copper 0.7/280 mm 1/2-round no. 11 - 3 meters

819,88 kr - 819,88 kr
819,88 kr
819,88 kr - 819,88 kr
819,88 kr

Copper half-round gutter Manufacturer: VM Zinc Material: Copper Dimension: 280 mm Thickness: 0.7 mm Inches: 11 Length: 3 meters Shape: 1/2 round ...

View full details
819,88 kr - 819,88 kr
819,88 kr
819,88 kr - 819,88 kr
819,88 kr

VM Zinc bending copper Ø87 mm 40 degrees

169,00 kr - 169,00 kr
169,00 kr
169,00 kr - 169,00 kr
169,00 kr

Bending for gutter Manufacturer: VM Zinc Material: Copper Diameter: 87 mm Degrees: 40 Shape: Round

169,00 kr - 169,00 kr
169,00 kr
169,00 kr - 169,00 kr
169,00 kr

VM Zinc manhole collar copper w/hole 87/150 mm

128,96 kr - 128,96 kr
128,96 kr
128,96 kr - 128,96 kr
128,96 kr

Well collar for completion between downspout and well Manufacturer: VM Zinc Material: Copper Diameter: 150 mm Hole diameter: 87 mm

128,96 kr - 128,96 kr
128,96 kr
128,96 kr - 128,96 kr
128,96 kr

VM Zinc manhole collar copper w/hole 76/150 mm

128,96 kr - 128,96 kr
128,96 kr
128,96 kr - 128,96 kr
128,96 kr

Well collar for completion between downspout and well Manufacturer: VM Zinc Material: Copper Diameter: 150 mm Hole diameter: 76 mm

128,96 kr - 128,96 kr
128,96 kr
128,96 kr - 128,96 kr
128,96 kr

Bend copper 72 degrees Ø87 mm

157,00 kr - 157,00 kr
157,00 kr
157,00 kr - 157,00 kr
157,00 kr

Bending for gutter Manufacturer: KME Material: Copper Diameter: 87 mm Grades: 72 Shape: Round

157,00 kr - 157,00 kr
157,00 kr
157,00 kr - 157,00 kr
157,00 kr

VMZINC overgangsmuffe kobber Ø76 mm til rundt nedløbsrør

99,57 kr - 99,57 kr
99,57 kr
99,57 kr - 99,57 kr
99,57 kr

Overgangsmuffe i kobber til Ø76 mm nedløbsrør Denne overgangsmuffe fra VMZINC i massivt kobber anvendes til samling af runde nedløbsrør med diamet...

View full details
99,57 kr - 99,57 kr
99,57 kr
99,57 kr - 99,57 kr
99,57 kr

PREFA Bend aluminum black Ø100 mm 85 degrees

265,00 kr - 265,00 kr
265,00 kr
265,00 kr - 265,00 kr
265,00 kr

Bending for downpipe Manufacturer: PREFA Material: Aluminum Surface: Black P 10 nupret Diameter: 100 mm Angle: 85 degrees Shape: Round ...

View full details
265,00 kr - 265,00 kr
265,00 kr
265,00 kr - 265,00 kr
265,00 kr

PREFA Manhole collar aluminum 80/115 mm black P10 now ready

67,00 kr - 67,00 kr
67,00 kr
67,00 kr - 67,00 kr
67,00 kr

Well collar for downpipe/well Manufacturer: PREFA Material: Aluminum Colour Black Surface: P10 nupret Outer diameter: 115 mm Inner d...

View full details
67,00 kr - 67,00 kr
67,00 kr
67,00 kr - 67,00 kr
67,00 kr

PREFA Downpipe aluminum 0.7x100 mm 3 meters black

428,05 kr - 428,05 kr
428,05 kr
428,05 kr - 428,05 kr
428,05 kr

Downpipe round Manufacturer: PREFA Material: Aluminum Surface: Black p 10 nupret Diameter: 100 mm Thickness: 0.7 mm Length: 3 meters Shape: Round

428,05 kr - 428,05 kr
428,05 kr
428,05 kr - 428,05 kr
428,05 kr

Hinge pin for wood 90 mm galvanized

67,47 kr - 67,47 kr
67,47 kr
67,47 kr - 67,47 kr
67,47 kr

Hinge pin Used: Wood Diameter: 90 mm

67,47 kr - 67,47 kr
67,47 kr
67,47 kr - 67,47 kr
67,47 kr

Hinge pin for wood 75 mm galvanized

54,74 kr - 54,74 kr
54,74 kr
54,74 kr - 54,74 kr
54,74 kr

Event pin Used: For wood Diameter: 75 mm

54,74 kr - 54,74 kr
54,74 kr
54,74 kr - 54,74 kr
54,74 kr

PREFA Hinge pin RAL9005 P10 black 0.7x80 mm

70,62 kr - 70,62 kr
70,62 kr
70,62 kr - 70,62 kr
70,62 kr

Hinge pin for Prefa downpipe Fits: PREFA Material: Aluminum Colour: Black RAL9005 Surface: P10 nupret Diameter: 80 mm Shape: Round

70,62 kr - 70,62 kr
70,62 kr
70,62 kr - 70,62 kr
70,62 kr

PREFA Mounting plate w/hinge pin RAL9005 black

104,00 kr - 104,00 kr
104,00 kr
104,00 kr - 104,00 kr
104,00 kr

Mounting plate for PREFA hinge pin Colour: Black RAL 9005

104,00 kr - 104,00 kr
104,00 kr
104,00 kr - 104,00 kr
104,00 kr

PREFA Hinge pin glossy Ø80 mm without mandrel w/thread

65,85 kr - 65,85 kr
65,85 kr
65,85 kr - 65,85 kr
65,85 kr

Hinge pin without mandrel with thread Fits: PREFA Material: Aluminum Colour: Glossy Diameter: 80 mm Shape: Round

65,85 kr - 65,85 kr
65,85 kr
65,85 kr - 65,85 kr
65,85 kr

Gutter short 1/4-round architect gutter 333 mm

40,00 kr - 40,00 kr
40,00 kr
40,00 kr - 40,00 kr
40,00 kr

Gutter for 1/4 round architectural gutter Size: 333 mm Fits: 1/4-round Rheinzink gutter Steel 37-2 EN10025, M certificate 10204 The rive...

View full details
40,00 kr - 40,00 kr
40,00 kr
40,00 kr - 40,00 kr
40,00 kr

Rheinzink Well collar Ø116 mm without hole

27,00 kr - 27,00 kr
27,00 kr
27,00 kr - 27,00 kr
27,00 kr

Manhole collar without hole Manufacturer: Rheinzink Material: Zinc Outer diameter: 117 mm Inner diameter: 116 mm Height: 30 mm Surface type: Wal...

View full details
27,00 kr - 27,00 kr
27,00 kr
27,00 kr - 27,00 kr
27,00 kr

Wire ball galvanized 80-100 mm 4''

95,00 kr - 95,00 kr
95,00 kr
95,00 kr - 95,00 kr
95,00 kr

Galvanized wire basket Mounted in the gutter and prevents leaves and branches from getting into the downspout and thus the sewer. Dimension:...

View full details
95,00 kr - 95,00 kr
95,00 kr
95,00 kr - 95,00 kr
95,00 kr

Rheinzink bend 85 degrees Ø76 mm walzblank

269,66 kr - 269,66 kr
269,66 kr
269,66 kr - 269,66 kr
269,66 kr

Bending for gutter Manufacturer: Rheinzink Material: Zinc Surface type: Walzblank Width: 76 mm Degrees: 85 Shape: Round Installation instruc...

View full details
269,66 kr - 269,66 kr
269,66 kr
269,66 kr - 269,66 kr
269,66 kr

Leaf catch Cylinder Ø90 t/roof well

187,00 kr - 187,00 kr
187,00 kr
187,00 kr - 187,00 kr
187,00 kr

Leaf catch cylindrical Diameter: Ø90 mm Height: 151 mm Material: Stainless steel AISI 304 (EN 1.4301) Cylinder Blade catch is a cylin...

View full details
187,00 kr - 187,00 kr
187,00 kr
187,00 kr - 187,00 kr
187,00 kr

Leaf catch Cylinder Ø63 t/roof well

187,00 kr - 187,00 kr
187,00 kr
187,00 kr - 187,00 kr
187,00 kr

Leaf catch cylindrical Diameter: Ø63 mm Height: 151 mm Material: Stainless steel AISI 304 (EN 1.4301) Cylinder Blade catch is a cylin...

View full details
187,00 kr - 187,00 kr
187,00 kr
187,00 kr - 187,00 kr
187,00 kr

Leaf catch Cylinder Ø125 t/roof well

229,00 kr - 229,00 kr
229,00 kr
229,00 kr - 229,00 kr
229,00 kr

Leaf catch cylindrical Diameter: Ø125 mm Height: 151 mm Material: Stainless steel AISI 304 (EN 1.4301) Cylinder Blade catch is a cylin...

View full details
229,00 kr - 229,00 kr
229,00 kr
229,00 kr - 229,00 kr
229,00 kr

Blade catch Horizontal Ø50 flat model w/stainless steel hexagon bolt

425,00 kr - 425,00 kr
425,00 kr
425,00 kr - 425,00 kr
425,00 kr

Blade catch horizontal - flat Width: 170 mm Height: 125 mm Thickness: 18 mm Fits: Ø50 mm With stainless hexagon bolt Material: Stain...

View full details
425,00 kr - 425,00 kr
425,00 kr
425,00 kr - 425,00 kr
425,00 kr

Blade catch Universal XL stainless steel 325x325 mm

538,00 kr - 538,00 kr
538,00 kr
538,00 kr - 538,00 kr
538,00 kr

Leaf catch universal XL Width: 325 mm Height: 325 mm Thickness: 43 mm Fits: Ø110-250 mm Material: Stainless steel, AISI 304 Leg mate...

View full details
538,00 kr - 538,00 kr
538,00 kr
538,00 kr - 538,00 kr
538,00 kr

Leaf catch rectangular well for triangular strip stainless steel 304

356,00 kr - 356,00 kr
356,00 kr
356,00 kr - 356,00 kr
356,00 kr

Leaf trap for rectangular roof well for triangular strip Width: 160 mm Body width: 155 mm Thickness: 102 mm Angle: 45 degrees Fits: Ø7...

View full details
356,00 kr - 356,00 kr
356,00 kr
356,00 kr - 356,00 kr
356,00 kr

Blade catch Horizontal Ø75-90-110 mm stainless steel

356,00 kr - 356,00 kr
356,00 kr
356,00 kr - 356,00 kr
356,00 kr

Leaf catch horizontal - oblique Width: 230 mm Height: 110 mm Thickness: 80 mm Fits: Ø75-90-110 mm Material: Stainless steel, AISI 304 ...

View full details
356,00 kr - 356,00 kr
356,00 kr
356,00 kr - 356,00 kr
356,00 kr

Lindab Rainline gutter 125 mm 6 meters Steel metallic

675,00 kr - 675,00 kr
675,00 kr
675,00 kr - 675,00 kr
675,00 kr

Lindab gutters Width: 125 mm Length: 600 cm Type: Semi-round Colour: Steel metallic 045 - corresponds to RAL 9006 Surface: HPB Mater...

View full details
675,00 kr - 675,00 kr
675,00 kr
675,00 kr - 675,00 kr
675,00 kr

Lindab Rainline downpipe Ø75 mm 3 meters Steel metallic

340,53 kr - 340,53 kr
340,53 kr
340,53 kr - 340,53 kr
340,53 kr

Lindab downpipe Diameter: 75 mm Length: 300 cm Colour: Steel metallic 045 - corresponds to RAL 9006 Surface: HPB Material: Steel ...

View full details
340,53 kr - 340,53 kr
340,53 kr
340,53 kr - 340,53 kr
340,53 kr

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare