Skip to content
Gratis fragt v/køb over 7500,- Kr. / 1000 kg. Direkte levering 1-3 hverdage på standard og 3-7 på specialvarer.
Gratis fragt v/køb over 7500,- Kr. / 1000 kg. Direkte levering 1-3 hverdage på standard og 3-7 på specialvarer.

Roof drainage

Filters

Gutters and downspouts for your house

Does your house or property need new gutters and downspouts?

A gutter is the gutter at the base of the roof that has the function of collecting rainwater from the roof and via a slight drop in the gutter to lead the water to the downpipe and on to the bed, faskine or sewer for proper roof drainage.

Climate change and increasing amounts of precipitation place great demands on your rainwater solution, so that you avoid unnecessary moisture and water damage to the facade and plinth.

Depending on where in the country the house is located, sooner or later it may be appropriate to replace the gutters and downpipes.
Gutters may begin to look worn, while others may develop leaks.
Or you have to change the roof, and thus a change of color might be the best solution.

Large selection of gutters and downpipes

We have a large selection of gutters, downspouts and all accessories for correct setup and installation.

We have gutter systems with all accessories in zinc , aluminium , copper , plastic and steel .

Blikshop.dk recommends replacing gutter iron or bracket iron in connection with the replacement of gutters. This is both to get some fresh ones, to hold the new gutters, but also because the old gutters, even if you choose the same manufacturer, may have been discontinued and replaced with new improved gutters or bracket irons. And it also looks good when your entire gutter system is new.

We carry products from all the leading manufacturers of solutions for roof drainage.

Including Rheinzink, VMZINC, Lindab, Plastmo, Prefa, and more.

PREFA Manhole collar aluminum 100/150 mm black p 10 nupret

76,14 kr - 76,14 kr
76,14 kr
76,14 kr - 76,14 kr
76,14 kr

Well collar for downpipe/well Manufacturer: PREFA Material: Aluminum Surface: Black p 10 nupret Outer diameter: 150 mm Inner diameter: 10...

View full details
76,14 kr - 76,14 kr
76,14 kr
76,14 kr - 76,14 kr
76,14 kr

PREFA water collection box aluminum black P10 80 mm

2.067,53 kr - 2.067,53 kr
2.067,53 kr
2.067,53 kr - 2.067,53 kr
2.067,53 kr

Water collection box Manufacturer: PREFA Material: Aluminum Surface: Black P10 nupret Diameter: 80 mm

2.067,53 kr - 2.067,53 kr
2.067,53 kr
2.067,53 kr - 2.067,53 kr
2.067,53 kr

PREFA Downpipe aluminum 0.7x100 mm 3 meters black

428,05 kr - 428,05 kr
428,05 kr
428,05 kr - 428,05 kr
428,05 kr

Downpipe round Manufacturer: PREFA Material: Aluminum Surface: Black p 10 nupret Diameter: 100 mm Thickness: 0.7 mm Length: 3 meters Shape: Round

428,05 kr - 428,05 kr
428,05 kr
428,05 kr - 428,05 kr
428,05 kr

Walraven ansatsskrue M8 x 50 mm

3,73 kr - 3,73 kr
3,73 kr
3,73 kr - 3,73 kr
3,73 kr

3,73 kr - 3,73 kr
3,73 kr
3,73 kr - 3,73 kr
3,73 kr

Hinge pin for wood 75 mm galvanized

54,74 kr - 54,74 kr
54,74 kr
54,74 kr - 54,74 kr
54,74 kr

Event pin Used: For wood Diameter: 75 mm

54,74 kr - 54,74 kr
54,74 kr
54,74 kr - 54,74 kr
54,74 kr

Eye screw t/hinge pin M6x20 mm

8,67 kr - 8,67 kr
8,67 kr
8,67 kr - 8,67 kr
8,67 kr

Eye screw for hinge pin Diameter: 6 mm Length: 20 mm Material: Galvanized

8,67 kr - 8,67 kr
8,67 kr
8,67 kr - 8,67 kr
8,67 kr

Hinge pin galvanized wall and wood Ø76 mm

56,67 kr - 56,67 kr
56,67 kr
56,67 kr - 56,67 kr
56,67 kr

Hinge pin for installing downpipes in masonry and on wood Diameter: 76 mm Including eye screw Including M8 - 10x100 mm shoulder screw Su...

View full details
56,67 kr - 56,67 kr
56,67 kr
56,67 kr - 56,67 kr
56,67 kr

Hinge pin galvanized wall Ø100 mm

31,25 kr - 31,25 kr
31,25 kr
31,25 kr - 31,25 kr
31,25 kr

Hinge pin for installing downpipes in masonry Diameter: 100 mm Including eye screw Suitable for Rheinzink and VM Zinc

31,25 kr - 31,25 kr
31,25 kr
31,25 kr - 31,25 kr
31,25 kr

Hinge pin galvanized wall Ø87 mm

31,25 kr - 31,25 kr
31,25 kr
31,25 kr - 31,25 kr
31,25 kr

Hinge pin for installing downpipes in masonry Diameter: 87 mm Including eye screw Suitable for Rheinzink and VM Zinc

31,25 kr - 31,25 kr
31,25 kr
31,25 kr - 31,25 kr
31,25 kr

Gutter short 1/2 round 10"/250 mm - Used for Rheinzink and VM Zinc

33,65 kr - 33,65 kr
33,65 kr
33,65 kr - 33,65 kr
33,65 kr

Gutter short Suitable for: Rheinzink and VM Zinc Size: 250 mm Gutter: 1/2 round Material: Steel 37-2 EN10025, M certificate 10204 Rivets: Alumin...

View full details
33,65 kr - 33,65 kr
33,65 kr
33,65 kr - 33,65 kr
33,65 kr

Wire ball galvanized 80-100 mm 4''

109,00 kr - 109,00 kr
109,00 kr
109,00 kr - 109,00 kr
109,00 kr

Galvanized wire basket Mounted in the gutter and prevents leaves and branches from getting into the downspout and thus the sewer. Dimension:...

View full details
109,00 kr - 109,00 kr
109,00 kr
109,00 kr - 109,00 kr
109,00 kr

Rheinzink end base w/spout left roller blank 280 mm

569,00 kr - 569,00 kr
569,00 kr
569,00 kr - 569,00 kr
569,00 kr

End base with spout for gutter Manufacturer: Rheinzink Material: Zinc Product type: Collection Colour: Walzblank Size: 11" Mounted: Left Size: 2...

View full details
569,00 kr - 569,00 kr
569,00 kr
569,00 kr - 569,00 kr
569,00 kr

Blade catch Universal XL stainless steel 325x325 mm

453,85 kr - 453,85 kr
453,85 kr
453,85 kr - 453,85 kr
453,85 kr

Leaf catch universal XL Width: 325 mm Height: 325 mm Thickness: 43 mm Fits: Ø110-250 mm Material: Stainless steel, AISI 304 Leg mate...

View full details
453,85 kr - 453,85 kr
453,85 kr
453,85 kr - 453,85 kr
453,85 kr

Blade catch Horizontal Ø75-90-110 mm stainless steel

299,90 kr - 299,90 kr
299,90 kr
299,90 kr - 299,90 kr
299,90 kr

Leaf catch horizontal - oblique Width: 230 mm Height: 110 mm Thickness: 80 mm Fits: Ø75-90-110 mm Material: Stainless steel, AISI 304 ...

View full details
299,90 kr - 299,90 kr
299,90 kr
299,90 kr - 299,90 kr
299,90 kr

Stubai Grooving iron trestle 620 mm

1.905,43 kr - 1.905,43 kr
1.905,43 kr
1.905,43 kr - 1.905,43 kr
1.905,43 kr

Grating iron bucks Length: 620 mm Material: Powder-coated adjustable bending angle with wing screw Handle: Rubber

1.905,43 kr - 1.905,43 kr
1.905,43 kr
1.905,43 kr - 1.905,43 kr
1.905,43 kr

Roof well Ø75x600 mm for roofing felt

590,75 kr - 590,75 kr
590,75 kr
590,75 kr - 590,75 kr
590,75 kr

Roof well for vertical installation on roofing felt Width: 500 mm Depth: 500 mm Diameter: 75 mm or 90 mm Height: 600 mm Oring: 8 mm ...

View full details
590,75 kr - 590,75 kr
590,75 kr
590,75 kr - 590,75 kr
590,75 kr

Gutter long 1/2 round 11"/280 mm - Used for Rheinzink and VM Zinc

47,08 kr - 47,08 kr
47,08 kr
47,08 kr - 47,08 kr
47,08 kr

Gutter long Suitable for: Rheinzink and VM Zinc Width: 280 mm Gutter: 1/2 round Material: Steel 37-2 EN10025, M certificate 10204 Rivets: Alumin...

View full details
47,08 kr - 47,08 kr
47,08 kr
47,08 kr - 47,08 kr
47,08 kr

Lindab Rainline gutter 125 mm 6 meters Steel metallic

585,03 kr - 585,03 kr
585,03 kr
585,03 kr - 585,03 kr
585,03 kr

Lindab gutters Width: 125 mm Length: 600 cm Type: Semi-round Colour: Steel metallic 045 - corresponds to RAL 9006 Surface: HPB Mater...

View full details
585,03 kr - 585,03 kr
585,03 kr
585,03 kr - 585,03 kr
585,03 kr

Lindab Rainline downpipe Ø75 mm 3 meters Steel metallic

340,53 kr - 340,53 kr
340,53 kr
340,53 kr - 340,53 kr
340,53 kr

Lindab downpipe Diameter: 75 mm Length: 300 cm Colour: Steel metallic 045 - corresponds to RAL 9006 Surface: HPB Material: Steel ...

View full details
340,53 kr - 340,53 kr
340,53 kr
340,53 kr - 340,53 kr
340,53 kr

Lindab Rainline spout piece 125 mm to 75 mm downspout Steel metallic

152,90 kr - 152,90 kr
152,90 kr
152,90 kr - 152,90 kr
152,90 kr

Spout for Lindab gutters Size: 125 mm Diameter: 75 mm Type: Exterior Colour: Steel metallic 045 - corresponds to RAL 9006 Surface: HPB...

View full details
152,90 kr - 152,90 kr
152,90 kr
152,90 kr - 152,90 kr
152,90 kr

Lindab Rainline bracket iron 125 mm steel metallic

43,11 kr - 43,11 kr
43,11 kr
43,11 kr - 43,11 kr
43,11 kr

Bracket iron for Lindab gutters Gutter Size: 125mm / 5" Colour: Steel metallic 045 - corresponds to RAL 9006 Surface: HPB Material: Stee...

View full details
43,11 kr - 43,11 kr
43,11 kr
43,11 kr - 43,11 kr
43,11 kr

Lindab Rainline end base 125 mm Steel metallic

42,29 kr - 42,29 kr
42,29 kr
42,29 kr - 42,29 kr
42,29 kr

End base for Lindab gutter Gutter Size: 125mm / 5" Depth: 21 mm Colour: Steel metallic 045 - corresponds to RAL 9006 Surface: HPB Mate...

View full details
42,29 kr - 42,29 kr
42,29 kr
42,29 kr - 42,29 kr
42,29 kr

VM Zinc bead ring copper Ø76 mm

186,59 kr - 186,59 kr
186,59 kr
186,59 kr - 186,59 kr
186,59 kr

Beading spiral Manufacturer: VM Zinc Material: Copper Diameter: 76 mm

186,59 kr - 186,59 kr
186,59 kr
186,59 kr - 186,59 kr
186,59 kr

VM Zinc copper spout piece 333/76 mm quarter round gutter

81,22 kr - 81,22 kr
81,22 kr
81,22 kr - 81,22 kr
81,22 kr

Spout between downspout and quarter-round gutter Manufacturer: VM Zinc Material: Copper Gutter: 333 mm Inch: 12 Downspout: 76 mm Shape: 1/4-round

81,22 kr - 81,22 kr
81,22 kr
81,22 kr - 81,22 kr
81,22 kr

VM Zinc gutter copper 0.7/280 mm 1/2-round no. 11 - 3 meters

819,88 kr - 819,88 kr
819,88 kr
819,88 kr - 819,88 kr
819,88 kr

Copper half-round gutter Manufacturer: VM Zinc Material: Copper Dimension: 280 mm Thickness: 0.7 mm Inches: 11 Length: 3 meters Shape: 1/2 round ...

View full details
819,88 kr - 819,88 kr
819,88 kr
819,88 kr - 819,88 kr
819,88 kr

VM Zinc expansion nozzle copper 76/280 mm 1/2 round gutter

261,99 kr - 261,99 kr
261,99 kr
261,99 kr - 261,99 kr
261,99 kr

Expansion nozzle transition between gutter and downpipe Manufacturer: VM Zinc Material: Copper Dimension: 280 mm Inches: 11 Downpipe dimension: ...

View full details
261,99 kr - 261,99 kr
261,99 kr
261,99 kr - 261,99 kr
261,99 kr

VM Zinc expansion nozzle copper 87/333 mm 1/2 round gutter

331,13 kr - 331,13 kr
331,13 kr
331,13 kr - 331,13 kr
331,13 kr

Expansion nozzle transition between gutter and downpipe Manufacturer: VM Zinc Material: Copper Dimension: 333 mm Inch: 12 Downpipe dimension: 87...

View full details
331,13 kr - 331,13 kr
331,13 kr
331,13 kr - 331,13 kr
331,13 kr

VM Zinc expansion piece copper 280 mm 1/2 round

259,00 kr - 259,00 kr
259,00 kr
259,00 kr - 259,00 kr
259,00 kr

Expansion piece double vulcanized for semi-circular gutter Manufacturer: VM Zinc Material: Copper Dimension: 280 mm Inches: 11 Thickness: 0.7 mm...

View full details
259,00 kr - 259,00 kr
259,00 kr
259,00 kr - 259,00 kr
259,00 kr

VM Zinc double bend copper Ø87 mm

221,71 kr - 221,71 kr
221,71 kr
221,71 kr - 221,71 kr
221,71 kr

Double bend for gutter Manufacturer: VM Zinc Material: Copper Diameter: 87 mm Shape: Round With 55 mm front set

221,71 kr - 221,71 kr
221,71 kr
221,71 kr - 221,71 kr
221,71 kr

VM Zinc double bend copper Ø76 mm

262,87 kr - 262,87 kr
262,87 kr
262,87 kr - 262,87 kr
262,87 kr

Double bend for gutter Manufacturer: VM Zinc Material: Copper Diameter: 76 mm Shape: Round With 55 mm front set

262,87 kr - 262,87 kr
262,87 kr
262,87 kr - 262,87 kr
262,87 kr

VM Zinc bending copper Ø76 mm 85 degrees

269,00 kr - 269,00 kr
269,00 kr
269,00 kr - 269,00 kr
269,00 kr

Bending for gutter Manufacturer: VM Zinc Material: Copper Diameter: 76 mm Degrees: 85 Shape: Round

269,00 kr - 269,00 kr
269,00 kr
269,00 kr - 269,00 kr
269,00 kr

VM Zinc bending copper Ø76 mm 40 degrees

177,60 kr - 177,60 kr
177,60 kr
177,60 kr - 177,60 kr
177,60 kr

Bending for gutter Manufacturer: VM Zinc Material: Copper Diameter: 76 mm Degrees: 40 Shape: Round

177,60 kr - 177,60 kr
177,60 kr
177,60 kr - 177,60 kr
177,60 kr

VM Zinc bending copper Ø87 mm 72 degrees

168,00 kr - 168,00 kr
168,00 kr
168,00 kr - 168,00 kr
168,00 kr

Bending for gutter Manufacturer: VM Zinc Material: Copper Diameter: 87 mm Grades: 72 Shape: Round

168,00 kr - 168,00 kr
168,00 kr
168,00 kr - 168,00 kr
168,00 kr

VM Zinc bending copper Ø87 mm 85 degrees

333,46 kr - 333,46 kr
333,46 kr
333,46 kr - 333,46 kr
333,46 kr

Bending for gutter Manufacturer: VM Zinc Material: Copper Diameter: 87 mm Degrees: 85 Shape: Round

333,46 kr - 333,46 kr
333,46 kr
333,46 kr - 333,46 kr
333,46 kr

VM Zinc manhole collar copper w/hole 87/116 mm

67,50 kr - 67,50 kr
67,50 kr
67,50 kr - 67,50 kr
67,50 kr

Well collar for completion between downspout and well Manufacturer: VM Zinc Material: Copper Diameter: 116 mm Hole diameter: 87 mm

67,50 kr - 67,50 kr
67,50 kr
67,50 kr - 67,50 kr
67,50 kr

Gutter short copper 1/2 round gutter 280 mm

187,96 kr - 187,96 kr
187,96 kr
187,96 kr - 187,96 kr
187,96 kr

Gutter short for semi-circular gutter Material: Copper Dimension: 280 mm Inches: 11 Width: 25 mm Thickness: 5 mm With front and rear spring ...

View full details
187,96 kr - 187,96 kr
187,96 kr
187,96 kr - 187,96 kr
187,96 kr

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare