Roof drainage
Filters
- Accessories (1)
- Bending (33)
- Bottom end (20)
- Branch pipe (4)
- Bringing down (15)
- Collection piece (2)
- Console iron (11)
- Downpipe (10)
- Downpipe Round (6)
- Drain holder (1)
- Embossing (4)
- Expansion piece (10)
- Expansion study (2)
- Gering (33)
- Grating iron bucks (2)
- Gutter (6)
- Gutter iron (33)
- Half-round gutter (7)
- Hinge pins (40)
- Hængselsstift tilbehør (6)
- Hængselsstifter (1)
- Leaf catch (32)
- Pipe sleeve (13)
- Quarter round Architect gutter (2)
- Rainwater box (4)
- Rainwater collector (6)
- Rendejern (1)
- Roof gutter glue (3)
- Slider (2)
- Solve the problem (1)
- Spout (32)
- Tagbrønde til tagpap (2)
- Temporary drains (1)
- Well collar (22)
Gutters and downspouts for your house
Does your house or property need new gutters and downspouts?
A gutter is the gutter at the base of the roof that has the function of collecting rainwater from the roof and via a slight drop in the gutter to lead the water to the downpipe and on to the bed, faskine or sewer for proper roof drainage.
Climate change and increasing amounts of precipitation place great demands on your rainwater solution, so that you avoid unnecessary moisture and water damage to the facade and plinth.
Depending on where in the country the house is located, sooner or later it may be appropriate to replace the gutters and downpipes.
Gutters may begin to look worn, while others may develop leaks.
Or you have to change the roof, and thus a change of color might be the best solution.
Large selection of gutters and downpipes
We have a large selection of gutters, downspouts and all accessories for correct setup and installation.
We have gutter systems with all accessories in zinc , aluminium , copper , plastic and steel .
Blikshop.dk recommends replacing gutter iron or bracket iron in connection with the replacement of gutters. This is both to get some fresh ones, to hold the new gutters, but also because the old gutters, even if you choose the same manufacturer, may have been discontinued and replaced with new improved gutters or bracket irons. And it also looks good when your entire gutter system is new.
We carry products from all the leading manufacturers of solutions for roof drainage.
Including Rheinzink, VMZINC, Lindab, Plastmo, Prefa, and more.
PREFA sliding piece 80 mm black RAL9005 smooth
Slider Manufacturer: PREFA Surface: Black RAL9005 Diameter: 80 mm
PREFA water collection box 80 mm RAL9005 black smooth - not returnable
Water collection box Manufacturer: PREFA Material: Polyester Surface: RAL9005 Black Diameter: 80 mm
PREFA expansion piece RAL9005 black 1/2 round 333 mm incl. bead
Expansion piece Manufacturer: PREFA Surface: RAL9005 Black Diameter: 333 mm
PREFA Socket knee 0.7x80 mm P10 RAL9005 black - not returnable
Downspout/plinth knee for downspouts Manufacturer: PREFA Surface: Black Diameter: 80 mm Shape: 1/2 Round
PREFA Bend aluminum black Ø100 mm 85 degrees
Bending for downpipe Manufacturer: PREFA Material: Aluminum Surface: Black P 10 nupret Diameter: 100 mm Angle: 85 degrees Shape: Round ...
View full detailsPREFA miter aluminum 333 mm 1/4 round black inside
Miter for gutter Manufacturer: PREFA Material: Aluminum Surface: Black P10 nupret Size: 333 mm Type: Internal Fits: 1/4 round
PREFA End base aluminum left 333 mm 1/4-round black
Bottom end Manufacturer: PREFA Material: Aluminum Colour: Black P 10 nupret Dimension: 333 mm Shape: 1/4 round
PREFA End base aluminum right 333 mm 1/4-round black
Bottom end Manufacturer: PREFA Material: Aluminum Colour: Black P 10 nupret Dimension: 333 mm Shape: 1/4 round
PREFA End base aluminum long left 333 mm 1/4-round black
Bottom end Manufacturer: PREFA Material: Aluminum Colour: Black P 10 nupret Dimension: 333 mm Shape: 1/4 round
PREFA Pedestal knee aluminum black Ø100 mm
Downspout/plinth knee for downspouts Manufacturer: PREFA Material: Aluminum Surface: Black p 10 nupret Diameter: 100 mm Degrees: 90 Shape...
View full detailsPREFA miter aluminum 333 mm 1/4 round black exterior
Miter for gutter Manufacturer: PREFA Material: Aluminum Surface: Black P10 nupret Size: 333 mm Type: Exterior Fits: 1/4 round
PREFA water collection box aluminum black 100 mm
Water collection box Manufacturer: PREFA Material: Aluminum Surface: Black P10 nupret Diameter: 100 mm
PREFA Spout piece aluminum 333 mm 1/2-round black
Spout connectors for joining gutters and downpipes Manufacturer: PREFA Material: Aluminum Surface: Black p 10 nupret Gutter inches: 11" Gutter s...
View full detailsPREFA miter aluminum 333 mm 1/2 round black
Miter for gutter Manufacturer: PREFA Material: Aluminum Surface: Black P10 nupret Size: 333 mm Type: Internal Inch: 12 Fits: 1/2 round ...
View full detailsPREFA miter aluminum 333 mm 1/2-round black
Miter for gutter Manufacturer: PREFA Material: Aluminum Surface: Black P10 nupret Size: 333 mm Type: Exterior Inch: 12 Fits: 1/2 round ...
View full detailsPREFA miter aluminum 280 mm 1/2-round black
Miter for gutter Manufacturer: PREFA Material: Aluminum Surface: Black P10 nupret Size: 280 mm Type: Internal Inches: 11 Fits: 1/2 roun...
View full detailsPREFA End base aluminum long right 333 mm 1/4-round black
Bottom end Manufacturer: PREFA Material: Aluminum Colour: Black P 10 nupret Dimension: 333 mm Shape: 1/4 round
PREFA Bend aluminum black Ø100 mm 72 degrees
Bending for downpipe Manufacturer: PREFA Material: Aluminum Surface: Black P 10 nupret Diameter: 100 mm Angle: 72 degrees Shape: Round ...
View full detailsPREFA Spout aluminum black p 10 nupret 280 mm 1/2-round
Spout connectors for joining gutters and downpipes Manufacturer: PREFA Material: Aluminum Surface: Black p 10 nupret Gutter inches: 11" Gutter s...
View full detailsPREFA Gutter aluminum long 333 mm 1/2-round black
Gutter long Fits: PREFA Material: Aluminum Surface: P 10 nupret Colour Black Size: 333 mm Inch: 12 Thickness: 6 mm Width: 28 mm Gutter: 1/2 roun...
View full detailsPREFA Spout piece aluminum 280 mm 1/2-round black
Spout connectors for joining gutters and downpipes Manufacturer: PREFA Material: Aluminum Surface: Black p 10 nupret Gutter inches: 11" Gutter s...
View full detailsPREFA sliding piece aluminum 80 mm black
Slider Manufacturer: PREFA Surface: Black p 10 nupret Diameter: 80 mm
PREFA expansion piece aluminum black 1/2 round 280 mm
Expansion piece Manufacturer: PREFA Surface: Black p 10 nupret Diameter: 280 mm
PREFA Manhole collar aluminum 100/115 mm black p 10 nupret
Well collar for downpipe/well Manufacturer: PREFA Material: Aluminum Surface: Black p 10 nupret Outer diameter: 115 mm Inner diameter: 10...
View full detailsPREFA Gutter aluminum long 1/2-round black
Gutter long Fits: PREFA Material: Aluminum Surface: P 10 nupret Colour Black Size: 280 mm Inches: 11 Thickness: 6 mm Width: 28 mm Gutter: 1/2 ro...
View full detailsPREFA Bend aluminum black Ø100 mm 40 degrees
Bending for downpipe Manufacturer: PREFA Material: Aluminum Surface: Black P 10 nupret Diameter: 100 mm Angle: 40 degrees Shape: Round ...
View full detailsPREFA sliding piece aluminum 100 mm black
Slider Manufacturer: PREFA Surface: Black p 10 nupret Diameter: 100 mm
PREFA Manhole collar aluminum 100/150 mm black p 10 nupret
Well collar for downpipe/well Manufacturer: PREFA Material: Aluminum Surface: Black p 10 nupret Outer diameter: 150 mm Inner diameter: 10...
View full detailsPREFA End base aluminum 280 mm 1/2-round black
Bottom end Manufacturer: PREFA Material: Aluminum Colour: Black P 10 nupret Dimension: 280 mm Gutter inches: 11" Shape: 1/2 round
PREFA Pipe joint sleeve aluminum black Ø100 mm
Pipe joint Manufacturer: PREFA Material: Aluminum Surface: Black p 10 nupret Diameter: 100 mm Shape: Round
PREFA miter aluminum black 280 mm 1/2-round
Miter for gutter Manufacturer: PREFA Material: Aluminum Surface: Black P10 nupret Size: 280 mm Type: Exterior Inches: 11 Fits: 1/2 roun...
View full detailsPREFA prefalz Console iron aluminum 1/2 round black 333 mm
Console iron Fits: PREFA Material: Aluminum Colour: Black P 10 nupret Size: 333 mm Inch: 12 Gutter: 1/2 Round The plumber's tip! What dista...
View full detailsPREFA Downpipe aluminum 0.7x100 mm 3 meters black
Downpipe round Manufacturer: PREFA Material: Aluminum Surface: Black p 10 nupret Diameter: 100 mm Thickness: 0.7 mm Length: 3 meters Shape: Round
PREFA Manhole collar aluminum black 80/115 mm
Well collar for downpipe/well Manufacturer: PREFA Material: Aluminum Surface: Black p 10 nupret Outer diameter: 115 mm Inner diameter: 80...
View full detailsPREFA Expansion piece aluminum black 333 mm 1/4 round
Expansion piece for gutter Manufacturer: PREFA Surface: Black p 10 nupret Diameter: 333 mm Fits: 1/4 round
PREFA Bend aluminum black Ø80 mm
Bending for downpipe Manufacturer: PREFA Material: Aluminum Surface: Black P 10 nupret Diameter: 80 mm Angle: 40 degrees Shape: Round ...
View full details