Roof drainage
Filters
- Accessories (1)
- Bending (32)
- Bottom end (16)
- Branch pipe (4)
- Bringing down (15)
- Brøndkrave (1)
- Collection piece (2)
- Console iron (11)
- Downpipe (10)
- Downpipe Round (6)
- Drain holder (1)
- Embossing (4)
- Expansion piece (10)
- Expansion study (1)
- Gering (33)
- Grating iron bucks (1)
- Gutter (6)
- Gutter iron (33)
- Half-round gutter (6)
- Hinge pins (37)
- Hængselsstift tilbehør (6)
- Hængselsstifter (2)
- Leaf catch (32)
- Pipe sleeve (13)
- Quarter round Architect gutter (2)
- Rainwater box (4)
- Rainwater collector (6)
- Rendejern (1)
- Roof gutter glue (3)
- Slider (2)
- Solve the problem (1)
- Spout (32)
- Tagbrønde til tagpap (2)
- Temporary drains (1)
- Well collar (21)
Gutters and downspouts for your house
Does your house or property need new gutters and downspouts?
A gutter is the gutter at the base of the roof that has the function of collecting rainwater from the roof and via a slight drop in the gutter to lead the water to the downpipe and on to the bed, faskine or sewer for proper roof drainage.
Climate change and increasing amounts of precipitation place great demands on your rainwater solution, so that you avoid unnecessary moisture and water damage to the facade and plinth.
Depending on where in the country the house is located, sooner or later it may be appropriate to replace the gutters and downpipes.
Gutters may begin to look worn, while others may develop leaks.
Or you have to change the roof, and thus a change of color might be the best solution.
Large selection of gutters and downpipes
We have a large selection of gutters, downspouts and all accessories for correct setup and installation.
We have gutter systems with all accessories in zinc , aluminium , copper , plastic and steel .
Blikshop.dk recommends replacing gutter iron or bracket iron in connection with the replacement of gutters. This is both to get some fresh ones, to hold the new gutters, but also because the old gutters, even if you choose the same manufacturer, may have been discontinued and replaced with new improved gutters or bracket irons. And it also looks good when your entire gutter system is new.
We carry products from all the leading manufacturers of solutions for roof drainage.
Including Rheinzink, VMZINC, Lindab, Plastmo, Prefa, and more.
PREFA Bend aluminum black Ø100 mm 40 degrees
Bending for downpipe Manufacturer: PREFA Material: Aluminum Surface: Black P 10 nupret Diameter: 100 mm Angle: 40 degrees Shape: Round ...
View full detailsPREFA sliding piece aluminum 100 mm black
Slider Manufacturer: PREFA Surface: Black p 10 nupret Diameter: 100 mm
PREFA End base aluminum 280 mm 1/2-round black
Bottom end Manufacturer: PREFA Material: Aluminum Colour: Black P 10 nupret Dimension: 280 mm Gutter inches: 11" Shape: 1/2 round
PREFA Pipe joint sleeve aluminum black Ø100 mm
Pipe joint Manufacturer: PREFA Material: Aluminum Surface: Black p 10 nupret Diameter: 100 mm Shape: Round
PREFA miter aluminum black 280 mm 1/2-round
Miter for gutter Manufacturer: PREFA Material: Aluminum Surface: Black P10 nupret Size: 280 mm Type: Exterior Inches: 11 Fits: 1/2 roun...
View full detailsPREFA prefalz Console iron aluminum 1/2 round black 333 mm
Console iron Fits: PREFA Material: Aluminum Colour: Black P 10 nupret Size: 333 mm Inch: 12 Gutter: 1/2 Round The plumber's tip! What dista...
View full detailsPREFA Manhole collar aluminum black 80/115 mm
Well collar for downpipe/well Manufacturer: PREFA Material: Aluminum Surface: Black p 10 nupret Outer diameter: 115 mm Inner diameter: 80...
View full detailsPREFA Expansion piece aluminum black 333 mm 1/4 round
Expansion piece for gutter Manufacturer: PREFA Surface: Black p 10 nupret Diameter: 333 mm Fits: 1/4 round
PREFA Bend aluminum black Ø80 mm
Bending for downpipe Manufacturer: PREFA Material: Aluminum Surface: Black P 10 nupret Diameter: 80 mm Angle: 40 degrees Shape: Round ...
View full detailsPREFA prefalz Console iron 1/2 round black 280 mm
Console iron Fits: PREFA Material: Aluminum Colour: Black P 10 nupret Size: 280 mm Inches: 11 Gutter: 1/2 Round The plumber's tip! What dista...
View full detailsPREFA Pipe collector aluminum black p 10 nupret Ø80 mm
Pipe collector for downpipes Manufacturer: PREFA Material: Aluminum Surface: Black p 10 nupret Diameter: 80 mm Shape: Round
PREFA Gutter aluminum short 1/2-round black
Gutter short Fits: PREFA Material: Aluminum Surface: P 10 nupret Colour Black Size: 280 mm Inches: 11 Thickness: 6 mm Width: 28 mm Gutter: 1/2 r...
View full detailsPREFA adhesive
PREFA adhesive Special silicone for gluing gutters and smooth surfaces
PREFA Bracket iron 1/4 round black 333 mm
Console iron Fits: PREFA Material: Aluminum Colour Black Size: 333 mm Inch: 1/4 Gutter: Round The plumber's tip! What distance should there...
View full detailsPREFA Gutter short 333 mm 1/2-round black
Gutter short Fits: PREFA Material: Aluminum Colour Black Size: 333 mm Inch: 12 Width: 28 mm Gutter: 1/2 round The plumber's tip! What distance s...
View full detailsPREFA Spout piece aluminum 333 mm 1/2-round black
Spout connectors for joining gutters and downpipes Manufacturer: PREFA Material: Aluminum Surface: Black Gutter Inch: 12" Gutter size: 333 mm Shap...
View full detailsPREFA End base aluminum 333 mm 1/2-round black
Bottom end Manufacturer: PREFA Material: Aluminum Colour Black Dimension: 333 mm Gutter Inch: 12" Shape: Semi-round
PREFA bend aluminum RAL9005 black P10 nupret Ø80 mm 72 degrees
Bending for downpipe Manufacturer: PREFA Material: Aluminum Colour: Black RAL 9005 Surface P10 nupret Diameter: 80 mm Angle: 72 degrees S...
View full detailsWalraven set screw M8 x 80 mm
Gutter 1/4-round architect gutter 333 mm
Gutter for 1/4 round architectural gutter Length: 255 mm Size: 333 mm Manufacturer: Rheinzink Fits: 1/4-round gutter Material: Galvani...
View full detailsRheinzink pipe holder in stainless steel for gutters ø100 mm
Pipe holder in stainless steel Manufacturer: Rheinzink Material: Stainless steel Product type: Collections Diameter: Ø100 mm Quick and easy in...
View full detailsHinge pin for wall 90 mm galvanized
Hinge pin Used: Wall Diameter: 90 mm
PREFA Mounting plate t/hinge pin RAL7005 light gray - cannot be returned
Mounting plate for PREFA hinge pin Colour: Light grey Gutter type: For general 1/2 round
PREFA Mounting plate t/hinge pin M10 black
Mounting plate for PREFA hinge pin Colour Black Gutter type: For general 1/2 round
PREFA pipe clamp without mandrel black aluminium
Pipe hanger Fits: PREFA Material: Aluminum Colour: Black p 10 nupret Diameter: 100 mm Shape: Round
PREFA Mounting plate t/hinge pin blank
Mounting plate for PREFA hinge pin Colour: Glossy
Galvanized wooden hinge pin Ø100 mm
Hinge pin for installing downpipes on wood Diameter: 100 mm Assembly: Wood Distance from wall to edge bracket is 35 mm Incl. eye screw ...
View full detailsHinge pin galvanized wall and wood Ø100 mm
Hinge pin for installing downpipes in masonry and on wood Diameter: 100 mm Including eye screw Including M8 - 10x100 mm shoulder screw S...
View full detailsHinge pin galvanized wall and wood Ø87 mm
Hinge pin for installing downpipes in masonry and on wood Diameter: 87 mm Including eye screw Including M8 - 10x100 mm shoulder screw Sui...
View full detailsGalvanized wooden hinge pin Ø92 mm
Hinge pin for installing downpipes on wood Diameter: 92 mm Assembly: Wood Distance from wall to edge bracket is 35 mm Incl. eye screw ...
View full detailsHinge pin galvanized wall Ø87 mm
Hinge pin for installing downspouts in walls Diameter: 87 mm Length of seam: 108 mm Including eye screw Suitable for Rheinzink and VM Zi...
View full detailsHinge pin galvanized wall Ø76 mm
Hinge pin for installing downpipes in masonry Diameter: 76 mm Including eye screw Suitable for Rheinzink and VM Zinc
Hinge pin galvanized wall Ø92 mm
Hinge pin for installing downspouts in walls Diameter: 92 mm Length of seam: 108 mm Including eye screw Suitable for Rheinzink and VM Zi...
View full detailsGutter short 1/4-round architect gutter 400 mm
Gutter for 1/4 round architectural gutter Size: 400 mm Fits: 1/4-round Rheinzink gutter Steel 37-2 EN10025, M certificate 10204 The rive...
View full detailsGrooving iron long w/bead 1/2 round 10"/250 mm - Used for Rheinzink and VM Zinc
Gutter long Suitable for: Rheinzink and VM Zinc Size: 250 mm Gutter: 1/2 round Material: Steel 37-2 EN10025, M certificate 10204 Rivets: Aluminu...
View full detailsGutter short 1/2 round 12"/333 mm - Used for Rheinzink and VM Zinc
Gutter long Suitable for: Rheinzink and VM Zinc Size: 280 mm Gutter: 1/2 round Material: Steel 37-2 EN10025, M certificate 10204 Rivets: Aluminu...
View full details