Roof drainage
Filters
- Accessories (1)
- Bending (33)
- Bottom end (20)
- Branch pipe (4)
- Bringing down (15)
- Collection piece (2)
- Console iron (11)
- Downpipe (10)
- Downpipe Round (6)
- Drain holder (1)
- Embossing (4)
- Expansion piece (10)
- Expansion study (2)
- Gering (33)
- Grating iron bucks (2)
- Gutter (6)
- Gutter iron (33)
- Half-round gutter (7)
- Hinge pins (40)
- Hængselsstift tilbehør (6)
- Hængselsstifter (1)
- Leaf catch (32)
- Pipe sleeve (13)
- Quarter round Architect gutter (2)
- Rainwater box (4)
- Rainwater collector (6)
- Rendejern (1)
- Roof gutter glue (3)
- Slider (2)
- Solve the problem (1)
- Spout (32)
- Tagbrønde til tagpap (2)
- Temporary drains (1)
- Well collar (22)
Gutters and downspouts for your house
Does your house or property need new gutters and downspouts?
A gutter is the gutter at the base of the roof that has the function of collecting rainwater from the roof and via a slight drop in the gutter to lead the water to the downpipe and on to the bed, faskine or sewer for proper roof drainage.
Climate change and increasing amounts of precipitation place great demands on your rainwater solution, so that you avoid unnecessary moisture and water damage to the facade and plinth.
Depending on where in the country the house is located, sooner or later it may be appropriate to replace the gutters and downpipes.
Gutters may begin to look worn, while others may develop leaks.
Or you have to change the roof, and thus a change of color might be the best solution.
Large selection of gutters and downpipes
We have a large selection of gutters, downspouts and all accessories for correct setup and installation.
We have gutter systems with all accessories in zinc , aluminium , copper , plastic and steel .
Blikshop.dk recommends replacing gutter iron or bracket iron in connection with the replacement of gutters. This is both to get some fresh ones, to hold the new gutters, but also because the old gutters, even if you choose the same manufacturer, may have been discontinued and replaced with new improved gutters or bracket irons. And it also looks good when your entire gutter system is new.
We carry products from all the leading manufacturers of solutions for roof drainage.
Including Rheinzink, VMZINC, Lindab, Plastmo, Prefa, and more.
Lindab Rainline gutter 125 mm 3 meters Steel metallic
Lindab gutters Width: 125 mm Length: 300 cm Type: Semi-round Colour: Steel metallic 045 - corresponds to RAL 9006 Surface: HPB Mater...
View full detailsLindab Rainline sliding piece 75 mm slanted incl. manhole collar Steel metallic
Inclined sliding piece for Lindab downpipe Diameter: 75 mm Manhole collar: Ø150 mm Colour: Steel metallic 045 - corresponds to RAL 9006 ...
View full detailsLindab Rainline extension miter 125 mm 45 degrees Steel metallic 5 pcs
External miter for Lindab gutters Length: 300 mm Size: 125 mm Degrees: 45 Type: Exterior Colour: Steel metallic 045 - corresponds to R...
View full detailsLindab Rainline ind miter 125 mm 45 degrees Steel metallic 5 pcs
Internal miter for Lindab gutters Length: 300 mm Size: 125 mm Degrees: 45 Type: Exterior Colour: Steel metallic 045 - corresponds to R...
View full detailsLindab Rainline extension miter 125 mm 90 degrees Steel metallic
External miter for Lindab gutters Length: 300 mm Size: 125 mm Degrees: 90 Type: Exterior Colour: Steel metallic 045 - corresponds to R...
View full detailsLindab Rainline ind miter 125 mm 90 degrees Steel metallic
Internal miter for Lindab gutters Length: 300 mm Size: 125 mm Degrees: 90 Type: Internal Colour: Steel metallic 045 - corresponds to R...
View full detailsLindab Rainline gutter iron 125x330 mm long Steel metallic
Gutter long for Lindab gutters Length: 330 mm Size: 125 mm Colour: Steel metallic 045 - corresponds to RAL 9006 Surface: HPB Material:...
View full detailsLindab Rainline sliding piece 75 mm straight Steel metallic
Sliding piece for Lindab downpipe Diameter: Ø75 mm Length 255 mm Colour: Steel metallic 045 - corresponds to RAL 9006 Surface: HPB Mat...
View full detailsLindab Rainline extension 75 mm 45 degrees Steel metallic
Extension for Lindab downpipe Diameter: Ø75 mm Degrees: 45 Colour: Steel metallic 045 - corresponds to RAL 9006 Surface: HPB Material:...
View full detailsLindab Rainline bend 75 mm 45 degrees Steel metallic
Bending for Lindab downpipe Diameter: Ø75 mm Degrees: 45 Colour: Steel metallic 045 - corresponds to RAL 9006 Surface: HPB Material: S...
View full detailsLindab Rainline bend 75 mm 70 degrees Steel metallic
Bending for Lindab downpipe Diameter: Ø75 mm Grades: 70 Colour: Steel metallic 045 - corresponds to RAL 9006 Surface: HPB Material: St...
View full detailsLindab Rainline spacer 75x1000 mm Steel metallic
Intermediate piece for Lindab downpipe Diameter: Ø95 mm Length: 100 cm Colour: Steel metallic 045 - corresponds to RAL 9006 Surface: HPB...
View full detailsLindab Rainline strainer for well collar Steel metallic
Sieve for Lindab gutters/downpipes Size: Ø95 mm Colour: Steel metallic 045 - corresponds to RAL 9006 Surface: HPB Material: Steel D...
View full detailsLindab Rainline cover 125 mm Steel metallic
Cover for Lindab gutters Size: 125 mm Colour: Steel metallic 045 - corresponds to RAL 9006 Surface: HPB Material: Steel Installatio...
View full detailsLindab Rainline plinth knee 75 mm Steel metallic
Socket knee for Lindab downpipe Diameter: 75 mm Height: 285 mm Colour: Steel metallic 045 - corresponds to RAL 9006 Surface: HPB Mater...
View full detailsLindab Rainline manhole collar 75/150 mm Steel metallic
Manhole collar for Lindab downpipe Diameter: 150 mm Fits: Ø75 mm drain Colour: Steel metallic 045 - corresponds to RAL 9006 Surface: HPB...
View full detailsLindab Rainline connector 125 mm steel metallic
Connecting piece for Lindab gutter Gutter Size: 125mm / 5" Rubber seal: EPDM Colour: Steel metallic 045 - corresponds to RAL 9006 Surfac...
View full detailsLindab Rainline branch pipe 75 mm Steel metallic
Branch pipe for Lindab downpipe Diameter: 75 mm Angle: 80 degrees Height: 330 mm Colour: Steel metallic 045 - corresponds to RAL 9006 ...
View full detailsLindab Rainline manhole collar 75/110 mm Steel metallic
Manhole collar for Lindab downpipe Diameter: 110 mm Fits: Ø75 mm drain Colour: Steel metallic 045 - corresponds to RAL 9006 Surface: HPB...
View full detailsLindab Rainline connector 75 mm Steel metallic
Joint for Lindab downpipe Diameter: 75 mm Height: 60+40 mm Colour: Steel metallic 045 - corresponds to RAL 9006 Surface: HPB Material:...
View full detailsPREFA Gutter 333 mm 1/2-round RAL7005 light gray - not returnable
PREFA aluminum gutter Manufacturer: PREFA Material: Aluminum Color: RAL7005 Width: 333 mm Thickness: 0.7 mm Length: 3 meters Shape...
View full detailsPREFA Gutter aluminum 333 mm 1/2 round black
PREFA aluminum gutter Manufacturer: PREFA Material: Aluminum Colour Black Width: 333 mm Thickness: 0.7 mm Length: 3 meters Shape: ...
View full detailsPREFA Gutter aluminum 333 mm 1/4-round architect black P10
PREFA aluminum gutter Manufacturer: PREFA Material: Aluminum Colour Black Width: 333 mm Thickness: 0.7 mm Length: 3 meters Shape: ...
View full detailsPREFA adhesive set
PREFA adhesive set Cartridge: Prefa special adhesive 290 ml Can: Adhesion cleaner 60 ml Contents: 1 Sanding paper, 2 cleaning cloths, 2 ad...
View full detailsPREFA Gutter aluminum 333 mm 1/2-round black
PREFA aluminum semi-circular gutter Manufacturer: PREFA Material: Aluminum Colour Black Width: 333 mm Thickness: 0.7 mm Length: 3 mete...
View full detailsP-cap copper standard Ø31.5 mm
P-Cap Manufacturer: KME Material: Copper External dimension: 178 mm Collar measurement: 154 mm Inner dimension: 31.5 mm
VM Zinc miter insert copper 333 mm stopped 90 degrees 1/2 round
Stopped miter for gutter Manufacturer: VM Zinc Material: Copper Size: 333 mm Type: Internal Degrees: 90 Fits: 1/2 round
PREFA Entry miter RAL9005 black 333 mm 1/2-round
Miter for gutter Manufacturer: PREFA Material: Aluminum Surface: Black RAL 9005 Size: 333 mm Type: Internal Degrees: 90 Fits: 1/2 round ...
View full detailsPREFA Insert miter blank 333 mm 1/2-round
Miter for gutter Manufacturer: PREFA Material: Aluminum Surface: Glossy Size: 333 mm Type: Internal Degrees: 90 Fits: 1/2 round
VM Zinc bead ring copper Ø87 mm
Beading spiral Manufacturer: VM Zinc Material: Copper Diameter: 87 mm
VM Zinc copper spout piece 280/87 mm half-round gutter t/soldering
Spout between downspout and semicircular gutter Manufacturer: VM Zinc Material: Copper Gutter: 280 mm Downspout: 87 mm Shape: 1/2-round
VM Zinc copper spout piece 280/76 mm half-round gutter t/soldering
Spout between downspout and semicircular gutter Manufacturer: VM Zinc Material: Copper Gutter: 280 mm Inches: 11 Downspout: 76 mm Shape: 1/2-round
VM Zinc copper spout piece 333/87 mm quarter round gutter
Spout between downspout and quarter-round gutter Manufacturer: VM Zinc Material: Copper Gutter: 333 mm Inch: 12 Downspout: 87 mm Shape: 1/4-round
VM Zinc gutter copper 0.7/333 mm 1/4-round - 3 meters
Copper quarter round architect gutter Manufacturer: VM Zinc Material: Copper Dimension: 333 mm Thickness: 0.7 mm Length: 3 meters Shape: 1/4 rou...
View full detailsVM Zinc half bead copper 76 mm
Half bead Manufacturer: VM Zinc Material: Copper Size: 76 mm
VM Zinc half bead copper 87 mm
Half bead Manufacturer: VM Zinc Material: Copper Size: 87 mm